W dniu 30.10.2020 o 13:07, Marcin Juszkiewicz via Asa-dev pisze:

Current situation summary:

SBSA level | tests run | passed | failed

3      |     45    |   32   |    6     4      |     87    |   44   |   13     5      |     92    |   44   |   20     6      |    102    |   44   |   29

As you see SBSA level 3 is near with just 6 failed tests:

12 : Check number of PMU counters Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1

102 : If PCIe, then GIC implements ITS Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1

104 : GIC Maintenance Interrupt Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1

206 : SYS Timer if PE Timer not ON PE Timers are not always-on. Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1

301 : Check NS Watchdog Accessibility No Watchdogs reported 0 Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1

302 : Check Watchdog WS0 interrupt No Watchdogs reported 0 Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1

Cards for failed tests:

test 12 is ASA-65 (add PMU counters) test 102 is ASA-66 (add ITS support) test 104 is ASA-70 (add GIC Maintenance Interrupt) test 206 is ASA-71 (fix always-on timers) test 301/302 is ASA-57 (add Watchdog support)

From them ASA-57 is done in QEMU, approved for EDK2.

If you have comments/ideas etc then please comment in Jira cards or in replies.