See https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/12/display/redirect
Changes:
------------------------------------------ [...truncated 3.06 MB...] * Structure Offset * : 0x80 Processor Hierarchy Node Structure : Type : 0x0 Length : 28 Reserved : 0x0 Flags : 0x1A Parent : 0x24 ACPI Processor ID : 0x0 Number of private resources : 2 Private resources [0] : 0x38 Private resources [1] : 0x50 * Structure Offset * : 0x9C Processor Hierarchy Node Structure : Type : 0x0 Length : 28 Reserved : 0x0 Flags : 0x1A Parent : 0x24 ACPI Processor ID : 0x1 Number of private resources : 2 Private resources [0] : 0x38 Private resources [1] : 0x50 * Structure Offset * : 0xB8 Processor Hierarchy Node Structure : Type : 0x0 Length : 28 Reserved : 0x0 Flags : 0x1A Parent : 0x24 ACPI Processor ID : 0x2 Number of private resources : 2 Private resources [0] : 0x38 Private resources [1] : 0x50 * Structure Offset * : 0xD4 Processor Hierarchy Node Structure : Type : 0x0 Length : 28 Reserved : 0x0 Flags : 0x1A Parent : 0x24 ACPI Processor ID : 0x3 Number of private resources : 2 Private resources [0] : 0x38 Private resources [1] : 0x50
INFO: SBBR v1.2: All mandatory ACPI tables are installed
Table Statistics: 0 Error(s) 0 Warning(s) [1m[33m[40mShell> [0m[37m[40mfs0:\Sbsa.efi
SBSA Architecture Compliance Suite Version 2.4
Starting tests for level 4 (Print level is 3)
Creating Platform Information Tables PE_INFO: Number of PE detected : 4 GIC_INFO: Number of GICD : 1 GIC_INFO: Number of ITS : 0 TIMER_INFO: Number of system timers : 0 WATCHDOG_INFO: Number of Watchdogs : 0 PCIE_INFO: Number of ECAM regions : 2 SMMU_INFO: Number of SMMU CTRL : 0 Peripheral: Num of USB controllers : 0 Peripheral: Num of SATA controllers : 1 Peripheral: Num of UART controllers : 1
*** Starting PE tests *** 1 : Check for number of PE : Result: PASS 2 : Check for SIMD extensions PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 3 : Check for 16-bit ASID support PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 4 : Check MMU Granule sizes PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 5 : Check Cache Architecture PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 6 : Check HW Coherence support PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 7 : Check Cryptographic extensions PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 8 : Check Little Endian support PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 9 : Check EL2 implementation PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 10 : Check AARCH64 implementation PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 11 : Check PMU Overflow signal : Result: PASS 12 : Check number of PMU counters PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 13 : Check Synchronous Watchpoints PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 14 : Check number of Breakpoints PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 15 : Check Arch symmetry across PE PSCI_CPU_ON: failure
Reg compare failed for PE index=1 for Register: CCSIDR_EL1 Current PE value = 0x0 Other PE value = 0x1003BD630E8 Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 16 : Check EL3 implementation PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 17 : Check CRC32 instruction support PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 1 for Level= 4 : Result: --FAIL-- 129 18 : Check for PMBIRQ signal SPE not supported on this PE : Result: -SKIPPED- 1 19 : Check for RAS extension PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 20 : Check for 16-Bit VMID PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 21 : Check for Virtual host extensions PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure
Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 22 : Stage 2 control of mem and cache PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure : Result: -SKIPPED- 1 23 : Check for nested virtualization PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure : Result: -SKIPPED- 1 24 : Support Page table map size change PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure : Result: -SKIPPED- 1 25 : Check for pointer signing PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure : Result: -SKIPPED- 1 26 : Check Activity monitors extension PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure : Result: -SKIPPED- 1 27 : Check for SHA3 and SHA512 support PSCI_CPU_ON: failure PSCI_CPU_ON: failure PSCI_CPU_ON: failure : Result: -SKIPPED- 1
*** One or more PE tests have failed... ***
*** Starting GIC tests *** 101 : Check GIC version : Result: PASS 102 : If PCIe, then GIC implements ITS Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 103 : GIC number of Security states(2) : Result: PASS 104 : GIC Maintenance Interrupt Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1
One or more GIC tests failed. Check Log
*** Starting Timer tests *** 201 : Check Counter Frequency : Result: PASS 202 : Check EL0-Phy timer interrupt : Result: PASS 203 : Check EL0-Virtual timer interrupt : Result: PASS 204 : Check EL2-phy timer interrupt : Result: PASS 205 : Check EL2-Virtual timer interrupt v8.1 VHE not supported on this PE : Result: -SKIPPED- 1 206 : SYS Timer if PE Timer not ON PE Timers are not always-on. Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 207 : CNTCTLBase & CNTBaseN access No System timers are defined : Result: -SKIPPED- 1
*** Skipping remaining System timer tests ***
*** One or more tests have Failed/Skipped.***
*** Starting Watchdog tests *** 301 : Check NS Watchdog Accessibility No Watchdogs reported 0 Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 302 : Check Watchdog WS0 interrupt No Watchdogs reported 0 Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1
***One or more tests have failed... ***
*** Starting PCIe tests *** 401 : Check ECAM Presence : Result: PASS 402 : Check ECAM value in MCFG table : Result: PASS
Unexpected exception occured FAR reported = 0x2BD5B180 ESR reported = 0x97800010 ------------------------------------------------------- Total Tests run = 42; Tests Passed = 10 Tests Failed = 23 ---------------------------------------------------------
*** SBSA tests complete. Reset the system. ***
[1m[33m[40mShell> [0m[37m[40mqemu-system-aarch64: terminating on signal 15 from pid 27847 (timeout) ++ failure_exit ++ cleanup_exit ++ rm -rf /home/buildslave/.docker + cleanup_exit + rm -rf /home/buildslave/.docker Build step 'Execute shell' marked build as failure