On Wed, Nov 25, 2020 at 4:01 PM Lorenzo Pieralisi via Linaro-open-discussions linaro-open-discussions@op-lists.linaro.org wrote:
On Wed, Nov 25, 2020 at 03:22:19PM +0000, Jonathan Cameron wrote:
On Wed, 25 Nov 2020 13:58:38 +0000 Lorenzo Pieralisi lorenzo.pieralisi@arm.com wrote:
On Wed, Nov 25, 2020 at 12:51:49PM +0000, Jonathan Cameron wrote:
[...]
Is December 2nd confirmed as next session ? If possible 3PM GMT
works
better for me; the NUMA topic raised by Jonathan is another
interesting
topic for debate.
Just to check, which NUMA topic?
https://op-lists.linaro.org/pipermail/linaro-open-discussions/2020-November/...
It would be useful (for me certainly) if you can give an update on what's still pending in the items in the discussion above (eg it is not clear what the "PCI fix" is) + how it is linked to CXL.
Sure, that should be a fairly short topic, but I'm happy to try to fill
in the gaps.
@Mike, can you add "Generic initiators - pending items" to the agenda.
For the PCI 'fix' it is this one that got applied and then reverted in
4.20 timeframe
http://patchwork.ozlabs.org/project/linux-pci/patch/20180912152140.3676-2-Jo...
I've not rebased or tested it recently so I'll check that it still
appears to be right
before the call.
The vCPU hotplug is also worth adding (even though I do not know what was discussed at KVM forum).
I was just about to email about that one. From our side, all that is
currently
going on around vCPU Hotplug is a rebase. At KVM forum Mark R kindly
offered
to see if he could find out answers to a few open questions. Perhaps
catch
up with Mark, or see if he can make the call?
Ok, will catch up with him, it is probably better if I have some time to do it (ie postpone the call for a week).
Furthermore, I am keen on discussing this:
https://lore.kernel.org/linux-arm-kernel/20201123065410.1915-1-lushenming@hu...
if the submitters are available, it would help to get some context in relation to upstream discussions.
I've messaged lushenming so hopefully we can sort out something on that
front.
Looks like finding a time next week is proving challenging. If that fails, perhaps we should try for the week after?
Yes we can, it would be easier to prepare the topics and find a suitable day as well, next week it looks like it is challenging. It would also give us some time to extend the invite.
Please let me know and apologies to Mike for all these emails to get it organized.
No problem, as soon as it is confirmed we want to try for the following week I can set up a poll to pick the day and hour
Thanks, Lorenzo
Thanks,
Jonathan
Thanks ! Lorenzo
I've lost track of what we are talking about.
Other than that we can slot in the topics that weren't discussed last time:
https://collaborate.linaro.org/display/LOD/Linaro+Open+Discussions+Home
even though those require a bit of preparation so the sooner we
finalize
the schedule the better.
Seems we have clashed with some internal Huawei activities so some
people who
would normally be active are snowed under this week.
Jonathan
Please let me know, thanks.
Lorenzo
- DT alignment. Don't want different solutions for each firmware
type.
- Lorenzo / Sami to check IORT revision E is final.
SVA
Zangfei gave summary:
- Huawei has devices that are not PCIe but are presented as
such.
- They support stall mode for SVA (spec violation)
- Resistance from kernel maintainers to maintaining a white
list for any quirk. Fine to fix
it once (JPB), but not to keep doing so.
- Note that stall mode not yet supported at all (JPB to send
out this cycle).
- If longer term fix need add can't be done via PCISIG etc then
need to convince
PCI and SMMU maintainers. Noted that quirk is very little
code.
- Other SVA topics.
- Mentioned virtual SVA (no actually problems just expressing
interest!)
- Would need Eric Auger, wasn't on topic list so Eric not on
call.
AI: Nothing planned until after JPB has upstreamed stall mode.
Hard to have discussion before that.
DVFS
guohanjun
Solutions exist for
- CPU DVFS (voltage + frequency scaling)
- PCIe device power states etc
No standard way of controlling Uncore voltage and frequency for
ACPI based systems.
3 options:
- MMIO / kernel driver.
- PSCI via trusted firmware and system management controller.
- ACPI (wrapping up an op region and SCMI)
Clarifications / discussions.
- Vincent G: Power states, or voltage frequency of interest?
Ans Voltage Freq
- Considered SCMI? Ans: Works only for DT as SCMI under ACPI
is wrapped up in AML
so looks like an ACPI interface.
- Sudeep H: Necessary to trace CPU freq? Yes.
- Sudeep H: Why not do it in firmware entirely? Ans. Not just
CPU. For example PCI device accessing
memory may well need the ring bus to be fast.
- Vincent G: Bandwidth affected? Yes. VG: mobile does this by
specifying a BW requirement (via SCMI.-
- Sudeep H Observed need to expose it via ACPI spec. (option 3
above).
- Sudeep H: Does PCI also need fine-grain control? We might
need to add to the spec.
- Sudeep H: What are the requirements? gaohanjun: Now we just
frequency scaling.
- Jonathan C: Noted PCI power state is not enough. It's
workload dependent.
- Sudeep H: We need to gather all the info, need to talk in
ASWG about DVFS
- Jonathan C: For now direct control probably makes sense.
Whilst it would be nice to have
a detailed enough system description in a standard way to
make general software that is a
big spec job.
- Jonathan C: Seems like true standard SW will not happen any
time soon.
AI: RFC to the linux-pm / linux-acpi Rafael and those in this
discussion to ask about
interest in adding per device DVFS to ACPI spec. Possibly
pursue code first ACPI
approach.
If I've miss listed or "volunteered" anyone for AIs they didn't
agree to then please
correct that.
Thanks all for contributions. I for one found it a very useful
call!
Jonathan
-- Linaro-open-discussions mailing list
https://collaborate.linaro.org/display/LOD/Linaro+Open+Discussions+Home
https://op-lists.linaro.org/mailman/listinfo/linaro-open-discussions
-- Linaro-open-discussions mailing list https://collaborate.linaro.org/display/LOD/Linaro+Open+Discussions+Home https://op-lists.linaro.org/mailman/listinfo/linaro-open-discussions