[Asa-dev] Build failed in Jenkins: SBSA QEMU firmware test #10

See https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/10/display/redirect

Changes:

------------------------------------------ [...truncated 2.95 MB...] 000000B0 : 00 00 00 00 19 00 00 00 - 00 00 00 00 00 00 00 00 ................ 000000C0 : 01 00 00 00 00 00 00 00 - 00 00 00 00 0B 50 00 00 .............P.. 000000D0 : 00 00 00 00 02 00 00 00 - 01 00 00 00 00 00 00 00 ................ 000000E0 : 17 00 00 00 00 00 00 00 - 00 00 00 00 00 00 06 40 ...............@ 000000F0 : 00 00 00 00 00 00 02 2C - 00 00 00 00 00 00 01 2C .......,......., 00000100 : 00 00 00 00 19 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00000110 : 02 00 00 00 00 00 00 00 - 00 00 00 00 0B 50 00 00 .............P.. 00000120 : 00 00 00 00 03 00 00 00 - 01 00 00 00 00 00 00 00 ................ 00000130 : 17 00 00 00 00 00 00 00 - 00 00 00 00 00 00 06 40 ...............@ 00000140 : 00 00 00 00 00 00 02 2C - 00 00 00 00 00 00 01 2C .......,......., 00000150 : 00 00 00 00 19 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00000160 : 03 00 00 00 00 00 00 00 - 00 00 00 00 0C 18 00 00 ................ 00000170 : 00 00 00 00 00 00 06 40 - 00 00 00 00 00 00 00 00 .......@........ 00000180 : 03 00 00 00 0E 10 00 00 - 00 00 08 40 00 00 00 00 ...........@.... 00000190 : 00 00 30 00 0F 14 00 00 - 00 00 00 00 00 00 02 30 ..0............0 000001A0 : 00 00 00 00 00 00 00 00 ........

Table Checksum : OK

MADT : Signature : APIC Length : 424 Revision : 4 Checksum : 0xC3 Oem ID : LNRO Oem Table ID : SBSASBSA Oem Revision : 0x20190910 Creator ID : LNRO Creator Revision : 0x1 Local Interrupt Controller Address : 0x0 Flags : 0x0 GICC : Type : 0xB Length : 80 Reserved : 0x0 CPU Interface Number : 0x0 ACPI Processor UID : 0x0 Flags : 0x1 Parking Protocol Version : 0x0 Performance Interrupt GSIV : 0x17 Parked Address : 0x0 Physical Base Address : 0x40060000 GICV : 0x2C020000 GICH : 0x2C010000 VGIC Maintenance interrupt : 0x19 GICR Base Address : 0x0 MPIDR : 0x0 Processor Power Efficiency Class : 0x0 Reserved : 0x0 SPE overflow Interrupt : 0x0 GICC : Type : 0xB Length : 80 Reserved : 0x0 CPU Interface Number : 0x0 ACPI Processor UID : 0x1 Flags : 0x1 Parking Protocol Version : 0x0 Performance Interrupt GSIV : 0x17 Parked Address : 0x0 Physical Base Address : 0x40060000 GICV : 0x2C020000 GICH : 0x2C010000 VGIC Maintenance interrupt : 0x19 GICR Base Address : 0x0 MPIDR : 0x1 Processor Power Efficiency Class : 0x0 Reserved : 0x0 SPE overflow Interrupt : 0x0 GICC : Type : 0xB Length : 80 Reserved : 0x0 CPU Interface Number : 0x0 ACPI Processor UID : 0x2 Flags : 0x1 Parking Protocol Version : 0x0 Performance Interrupt GSIV : 0x17 Parked Address : 0x0 Physical Base Address : 0x40060000 GICV : 0x2C020000 GICH : 0x2C010000 VGIC Maintenance interrupt : 0x19 GICR Base Address : 0x0 MPIDR : 0x2 Processor Power Efficiency Class : 0x0 Reserved : 0x0 SPE overflow Interrupt : 0x0 GICC : Type : 0xB Length : 80 Reserved : 0x0 CPU Interface Number : 0x0 ACPI Processor UID : 0x3 Flags : 0x1 Parking Protocol Version : 0x0 Performance Interrupt GSIV : 0x17 Parked Address : 0x0 Physical Base Address : 0x40060000 GICV : 0x2C020000 GICH : 0x2C010000 VGIC Maintenance interrupt : 0x19 GICR Base Address : 0x0 MPIDR : 0x3 Processor Power Efficiency Class : 0x0 Reserved : 0x0 SPE overflow Interrupt : 0x0 GICD : Type : 0xC Length : 24 Reserved : 0x0 GIC ID : 0x0 Physical Base Address : 0x40060000 System Vector Base : 0x0 GIC Version : 3 Reserved : 0 0 0 GICR : Type : 0xE Length : 16 Reserved : 0x0 Discovery Range Base Address : 0x40080000 Discovery Range Length : 0x300000 GIC ITS : Type : 0xF Length : 20 Reserved : 0x0 GIC ITS ID : 0x0 Physical Base Address : 0x30020000 Reserved : 0x0

ERROR: SBBR v1.2: Mandatory DBG2 table is missing ERROR: SBBR v1.2: Mandatory PPTT table is missing

Table Statistics: 2 Error(s) 0 Warning(s) Shell> fs0:\Sbsa.efi

SBSA Architecture Compliance Suite Version 2.4

Starting tests for level 4 (Print level is 3)

Creating Platform Information Tables PE_INFO: Number of PE detected : 1 GIC_INFO: Number of GICD : 1 GIC_INFO: Number of ITS : 1 TIMER_INFO: Number of system timers : 0 WATCHDOG_INFO: Number of Watchdogs : 0 PCIE_INFO: Number of ECAM regions : 2 SMMU_INFO: Number of SMMU CTRL : 0 Peripheral: Num of USB controllers : 0 Peripheral: Num of SATA controllers : 1 Peripheral: Num of UART controllers : 1

*** Starting PE tests *** 1 : Check for number of PE : Result: PASS 2 : Check for SIMD extensions : Result: PASS 3 : Check for 16-bit ASID support : Result: PASS 4 : Check MMU Granule sizes : Result: PASS 5 : Check Cache Architecture : Result: PASS 6 : Check HW Coherence support : Result: PASS 7 : Check Cryptographic extensions : Result: PASS 8 : Check Little Endian support : Result: PASS 9 : Check EL2 implementation : Result: PASS 10 : Check AARCH64 implementation : Result: PASS 11 : Check PMU Overflow signal : Result: PASS 12 : Check number of PMU counters Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 13 : Check Synchronous Watchpoints : Result: PASS 14 : Check number of Breakpoints : Result: PASS 15 : Check Arch symmetry across PE Skipping as num of PE is 1 : Result: -SKIPPED- 1 16 : Check EL3 implementation : Result: PASS 17 : Check CRC32 instruction support : Result: PASS 18 : Check for PMBIRQ signal SPE not supported on this PE : Result: -SKIPPED- 1 19 : Check for RAS extension Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 20 : Check for 16-Bit VMID Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 21 : Check for Virtual host extensions Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 22 : Stage 2 control of mem and cache : Result: -SKIPPED- 1 23 : Check for nested virtualization : Result: -SKIPPED- 1 24 : Support Page table map size change: Result: -SKIPPED- 1 25 : Check for pointer signing : Result: -SKIPPED- 1 26 : Check Activity monitors extension : Result: -SKIPPED- 1 27 : Check for SHA3 and SHA512 support : Result: -SKIPPED- 1

*** One or more PE tests have failed... ***

*** Starting GIC tests *** 101 : Check GIC version : Result: PASS 102 : If PCIe, then GIC implements ITS : Result: PASS 103 : GIC number of Security states(2) : Result: PASS 104 : GIC Maintenance Interrupt Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1

One or more GIC tests failed. Check Log

*** Starting Timer tests *** 201 : Check Counter Frequency : Result: PASS 202 : Check EL0-Phy timer interrupt : Result: PASS 203 : Check EL0-Virtual timer interrupt : Result: PASS 204 : Check EL2-phy timer interrupt : Result: PASS 205 : Check EL2-Virtual timer interrupt v8.1 VHE not supported on this PE : Result: -SKIPPED- 1 206 : SYS Timer if PE Timer not ON PE Timers are not always-on. Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 207 : CNTCTLBase & CNTBaseN access No System timers are defined : Result: -SKIPPED- 1

*** Skipping remaining System timer tests ***

*** One or more tests have Failed/Skipped.***

*** Starting Watchdog tests *** 301 : Check NS Watchdog Accessibility No Watchdogs reported 0 Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1 302 : Check Watchdog WS0 interrupt No Watchdogs reported 0 Failed on PE - 0 for Level= 4 : Result: --FAIL-- 1

***One or more tests have failed... ***

*** Starting PCIe tests *** 401 : Check ECAM Presence : Result: PASS 402 : Check ECAM value in MCFG table : Result: PASS

Unexpected exception occured FAR reported = 0x2BDAB180 ESR reported = 0x97800010 ------------------------------------------------------- Total Tests run = 42; Tests Passed = 24 Tests Failed = 8 ---------------------------------------------------------

*** SBSA tests complete. Reset the system. ***

Shell> qemu-system-aarch64: terminating on signal 15 from pid 24392 (timeout) ++ failure_exit ++ cleanup_exit ++ rm -rf /home/buildslave/.docker + cleanup_exit + rm -rf /home/buildslave/.docker Build step 'Execute shell' marked build as failure