Asa-dev October 2020

asa-dev@op-lists.linaro.org

2 participants
5 discussions

by Marcin Juszkiewicz

W dniu 30.10.2020 o 13:07, Marcin Juszkiewicz via Asa-dev pisze: > Current situation summary: > > SBSA level | tests run | passed | failed > ---------------------------------------- > 3 | 45 | 32 | 6 > 4 | 87 | 44 | 13 > 5 | 92 | 44 | 20 > 6 | 102 | 44 | 29 As you see SBSA level 3 is near with just 6 failed tests: 12 : Check number of PMU counters Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1 102 : If PCIe, then GIC implements ITS Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1 104 : GIC Maintenance Interrupt Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1 206 : SYS Timer if PE Timer not ON PE Timers are not always-on. Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1 301 : Check NS Watchdog Accessibility No Watchdogs reported 0 Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1 302 : Check Watchdog WS0 interrupt No Watchdogs reported 0 Failed on PE - 0 for Level= 3 : Result: --FAIL-- 1 Cards for failed tests: test 12 is ASA-65 (add PMU counters) test 102 is ASA-66 (add ITS support) test 104 is ASA-70 (add GIC Maintenance Interrupt) test 206 is ASA-71 (fix always-on timers) test 301/302 is ASA-57 (add Watchdog support) From them ASA-57 is done in QEMU, approved for EDK2. If you have comments/ideas etc then please comment in Jira cards or in replies.

4 years

Build failed in Jenkins: SBSA QEMU firmware test #21

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/21/display/redirect> Changes: ------------------------------------------ Started by user Marcin Juszkiewicz (marcin.juszkiewicz(a)linaro.org) Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on leg-aarch64-01-eda31cf3234d (docker-buster-arm64-leg) in workspace <https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/> [ldcg-sbsa-firmware] $ /bin/bash /tmp/jenkins16351330111846315753.sh + rm -rf '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/*'> + sudo apt update WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Get:1 http://security.debian.org/debian-security buster/updates InRelease [65.4 kB] Get:2 http://deb.debian.org/debian buster InRelease [121 kB] Get:3 http://deb.debian.org/debian buster-updates InRelease [51.9 kB] Ign:4 http://obs.linaro.org/linaro-overlay-buster/buster ./ InRelease Get:5 http://obs.linaro.org/linaro-overlay-buster/buster ./ Release [1,016 B] Get:6 http://obs.linaro.org/linaro-overlay-buster/buster ./ Release.gpg [228 B] Get:7 http://security.debian.org/debian-security buster/updates/main arm64 Packages [237 kB] Get:8 http://deb.debian.org/debian buster/main arm64 Packages [7,736 kB] Get:9 http://obs.linaro.org/linaro-overlay-buster/buster ./ Sources [19.2 kB] Get:10 http://deb.debian.org/debian buster-updates/main arm64 Packages [7,848 B] Get:11 http://obs.linaro.org/linaro-overlay-buster/buster ./ Packages [144 kB] Fetched 8,384 kB in 4s (2,163 kB/s) Reading package lists... Building dependency tree... Reading state information... 14 packages can be upgraded. Run 'apt list --upgradable' to see them. + sudo apt -y --no-install-recommends install build-essential pkg-config python3 libpixman-1-dev libglib2.0-dev dosfstools git-lfs mtools WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.6). dosfstools is already the newest version (4.1-2). mtools is already the newest version (4.0.23-1). python3 is already the newest version (3.7.3-1). python3 set to manually installed. The following additional packages will be installed: libblkid-dev libffi-dev libglib2.0-bin libglib2.0-dev-bin libmount-dev libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-0 libselinux1-dev libsepol1-dev zlib1g-dev Suggested packages: libglib2.0-doc libgdk-pixbuf2.0-bin | libgdk-pixbuf2.0-dev libxml2-utils The following NEW packages will be installed: git-lfs libblkid-dev libffi-dev libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libmount-dev libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-0 libpixman-1-dev libselinux1-dev libsepol1-dev pkg-config zlib1g-dev 0 upgraded, 17 newly installed, 0 to remove and 14 not upgraded. Need to get 7,750 kB of archives. After this operation, 30.3 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main arm64 git-lfs arm64 2.7.1-1+deb10u1 [2,514 kB] Get:2 http://deb.debian.org/debian buster/main arm64 libblkid-dev arm64 2.33.1-0.1 [229 kB] Get:3 http://deb.debian.org/debian buster/main arm64 libffi-dev arm64 3.2.1-9 [155 kB] Get:4 http://deb.debian.org/debian buster/main arm64 libglib2.0-bin arm64 2.58.3-2+deb10u2 [122 kB] Get:5 http://deb.debian.org/debian buster/main arm64 libglib2.0-dev-bin arm64 2.58.3-2+deb10u2 [156 kB] Get:6 http://deb.debian.org/debian buster/main arm64 libmount-dev arm64 2.33.1-0.1 [238 kB] Get:7 http://deb.debian.org/debian buster/main arm64 libpcre16-3 arm64 2:8.39-12 [236 kB] Get:8 http://deb.debian.org/debian buster/main arm64 libpcre32-3 arm64 2:8.39-12 [230 kB] Get:9 http://deb.debian.org/debian buster/main arm64 libpcrecpp0v5 arm64 2:8.39-12 [151 kB] Get:10 http://deb.debian.org/debian buster/main arm64 libpcre3-dev arm64 2:8.39-12 [578 kB] Get:11 http://deb.debian.org/debian buster/main arm64 libsepol1-dev arm64 2.8-1 [308 kB] Get:12 http://deb.debian.org/debian buster/main arm64 libselinux1-dev arm64 2.8-1+b1 [163 kB] Get:13 http://deb.debian.org/debian buster/main arm64 pkg-config arm64 0.29-6 [62.2 kB] Get:14 http://deb.debian.org/debian buster/main arm64 zlib1g-dev arm64 1:1.2.11.dfsg-1 [210 kB] Get:15 http://deb.debian.org/debian buster/main arm64 libglib2.0-dev arm64 2.58.3-2+deb10u2 [1,509 kB] Get:16 http://deb.debian.org/debian buster/main arm64 libpixman-1-0 arm64 0.36.0-1 [436 kB] Get:17 http://deb.debian.org/debian buster/main arm64 libpixman-1-dev arm64 0.36.0-1 [453 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 7,750 kB in 1s (10.5 MB/s) Selecting previously unselected package git-lfs. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 32840 files and directories currently installed.) Preparing to unpack .../00-git-lfs_2.7.1-1+deb10u1_arm64.deb ... Unpacking git-lfs (2.7.1-1+deb10u1) ... Selecting previously unselected package libblkid-dev:arm64. Preparing to unpack .../01-libblkid-dev_2.33.1-0.1_arm64.deb ... Unpacking libblkid-dev:arm64 (2.33.1-0.1) ... Selecting previously unselected package libffi-dev:arm64. Preparing to unpack .../02-libffi-dev_3.2.1-9_arm64.deb ... Unpacking libffi-dev:arm64 (3.2.1-9) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../03-libglib2.0-bin_2.58.3-2+deb10u2_arm64.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../04-libglib2.0-dev-bin_2.58.3-2+deb10u2_arm64.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:arm64. Preparing to unpack .../05-libmount-dev_2.33.1-0.1_arm64.deb ... Unpacking libmount-dev:arm64 (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:arm64. Preparing to unpack .../06-libpcre16-3_2%3a8.39-12_arm64.deb ... Unpacking libpcre16-3:arm64 (2:8.39-12) ... Selecting previously unselected package libpcre32-3:arm64. Preparing to unpack .../07-libpcre32-3_2%3a8.39-12_arm64.deb ... Unpacking libpcre32-3:arm64 (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:arm64. Preparing to unpack .../08-libpcrecpp0v5_2%3a8.39-12_arm64.deb ... Unpacking libpcrecpp0v5:arm64 (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:arm64. Preparing to unpack .../09-libpcre3-dev_2%3a8.39-12_arm64.deb ... Unpacking libpcre3-dev:arm64 (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:arm64. Preparing to unpack .../10-libsepol1-dev_2.8-1_arm64.deb ... Unpacking libsepol1-dev:arm64 (2.8-1) ... Selecting previously unselected package libselinux1-dev:arm64. Preparing to unpack .../11-libselinux1-dev_2.8-1+b1_arm64.deb ... Unpacking libselinux1-dev:arm64 (2.8-1+b1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../12-pkg-config_0.29-6_arm64.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package zlib1g-dev:arm64. Preparing to unpack .../13-zlib1g-dev_1%3a1.2.11.dfsg-1_arm64.deb ... Unpacking zlib1g-dev:arm64 (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:arm64. Preparing to unpack .../14-libglib2.0-dev_2.58.3-2+deb10u2_arm64.deb ... Unpacking libglib2.0-dev:arm64 (2.58.3-2+deb10u2) ... Selecting previously unselected package libpixman-1-0:arm64. Preparing to unpack .../15-libpixman-1-0_0.36.0-1_arm64.deb ... Unpacking libpixman-1-0:arm64 (0.36.0-1) ... Selecting previously unselected package libpixman-1-dev:arm64. Preparing to unpack .../16-libpixman-1-dev_0.36.0-1_arm64.deb ... Unpacking libpixman-1-dev:arm64 (0.36.0-1) ... Setting up libpcrecpp0v5:arm64 (2:8.39-12) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up libpixman-1-0:arm64 (0.36.0-1) ... Setting up libblkid-dev:arm64 (2.33.1-0.1) ... Setting up libpixman-1-dev:arm64 (0.36.0-1) ... Setting up libpcre16-3:arm64 (2:8.39-12) ... Setting up libsepol1-dev:arm64 (2.8-1) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up libffi-dev:arm64 (3.2.1-9) ... Setting up libpcre32-3:arm64 (2:8.39-12) ... Setting up pkg-config (0.29-6) ... Setting up zlib1g-dev:arm64 (1:1.2.11.dfsg-1) ... Setting up git-lfs (2.7.1-1+deb10u1) ... Setting up libmount-dev:arm64 (2.33.1-0.1) ... Setting up libpcre3-dev:arm64 (2:8.39-12) ... Setting up libselinux1-dev:arm64 (2.8-1+b1) ... Setting up libglib2.0-dev:arm64 (2.58.3-2+deb10u2) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libglib2.0-0:arm64 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. + fetch_code + git clone --depth 1 https://github.com/qemu/qemu.git Cloning into 'qemu'... Checking out files: 44% (3542/7939) Checking out files: 45% (3573/7939) Checking out files: 46% (3652/7939) Checking out files: 47% (3732/7939) Checking out files: 48% (3811/7939) Checking out files: 49% (3891/7939) Checking out files: 50% (3970/7939) Checking out files: 51% (4049/7939) Checking out files: 52% (4129/7939) Checking out files: 53% (4208/7939) Checking out files: 54% (4288/7939) Checking out files: 55% (4367/7939) Checking out files: 56% (4446/7939) Checking out files: 57% (4526/7939) Checking out files: 58% (4605/7939) Checking out files: 59% (4685/7939) Checking out files: 60% (4764/7939) Checking out files: 61% (4843/7939) Checking out files: 62% (4923/7939) Checking out files: 63% (5002/7939) Checking out files: 64% (5081/7939) Checking out files: 65% (5161/7939) Checking out files: 66% (5240/7939) Checking out files: 67% (5320/7939) Checking out files: 68% (5399/7939) Checking out files: 69% (5478/7939) Checking out files: 70% (5558/7939) Checking out files: 71% (5637/7939) Checking out files: 72% (5717/7939) Checking out files: 73% (5796/7939) Checking out files: 74% (5875/7939) Checking out files: 75% (5955/7939) Checking out files: 75% (6028/7939) Checking out files: 76% (6034/7939) Checking out files: 77% (6114/7939) Checking out files: 78% (6193/7939) Checking out files: 79% (6272/7939) Checking out files: 80% (6352/7939) Checking out files: 81% (6431/7939) Checking out files: 82% (6510/7939) Checking out files: 83% (6590/7939) Checking out files: 84% (6669/7939) Checking out files: 85% (6749/7939) Checking out files: 86% (6828/7939) Checking out files: 87% (6907/7939) Checking out files: 88% (6987/7939) Checking out files: 89% (7066/7939) Checking out files: 90% (7146/7939) Checking out files: 91% (7225/7939) Checking out files: 92% (7304/7939) Checking out files: 93% (7384/7939) Checking out files: 94% (7463/7939) Checking out files: 95% (7543/7939) Checking out files: 96% (7622/7939) Checking out files: 97% (7701/7939) Checking out files: 98% (7781/7939) Checking out files: 99% (7860/7939) Checking out files: 100% (7939/7939) Checking out files: 100% (7939/7939), done. + git clone --depth 1 --recurse-submodules https://github.com/tianocore/edk2.git Cloning into 'edk2'... Checking out files: 42% (3237/7649) Checking out files: 43% (3290/7649) Checking out files: 44% (3366/7649) Checking out files: 45% (3443/7649) Checking out files: 46% (3519/7649) Checking out files: 47% (3596/7649) Checking out files: 48% (3672/7649) Checking out files: 49% (3749/7649) Checking out files: 50% (3825/7649) Checking out files: 51% (3901/7649) Checking out files: 52% (3978/7649) Checking out files: 53% (4054/7649) Checking out files: 54% (4131/7649) Checking out files: 55% (4207/7649) Checking out files: 56% (4284/7649) Checking out files: 57% (4360/7649) Checking out files: 58% (4437/7649) Checking out files: 59% (4513/7649) Checking out files: 60% (4590/7649) Checking out files: 61% (4666/7649) Checking out files: 62% (4743/7649) Checking out files: 63% (4819/7649) Checking out files: 64% (4896/7649) Checking out files: 65% (4972/7649) Checking out files: 66% (5049/7649) Checking out files: 67% (5125/7649) Checking out files: 68% (5202/7649) Checking out files: 69% (5278/7649) Checking out files: 70% (5355/7649) Checking out files: 71% (5431/7649) Checking out files: 72% (5508/7649) Checking out files: 73% (5584/7649) Checking out files: 74% (5661/7649) Checking out files: 75% (5737/7649) Checking out files: 76% (5814/7649) Checking out files: 77% (5890/7649) Checking out files: 78% (5967/7649) Checking out files: 79% (6043/7649) Checking out files: 80% (6120/7649) Checking out files: 81% (6196/7649) Checking out files: 82% (6273/7649) Checking out files: 83% (6349/7649) Checking out files: 84% (6426/7649) Checking out files: 85% (6502/7649) Checking out files: 86% (6579/7649) Checking out files: 87% (6655/7649) Checking out files: 88% (6732/7649) Checking out files: 89% (6808/7649) Checking out files: 89% (6851/7649) Checking out files: 90% (6885/7649) Checking out files: 91% (6961/7649) Checking out files: 92% (7038/7649) Checking out files: 93% (7114/7649) Checking out files: 94% (7191/7649) Checking out files: 95% (7267/7649) Checking out files: 96% (7344/7649) Checking out files: 97% (7420/7649) Checking out files: 98% (7497/7649) Checking out files: 99% (7573/7649) Checking out files: 100% (7649/7649) Checking out files: 100% (7649/7649), done. Submodule 'SoftFloat' (https://github.com/ucb-bar/berkeley-softfloat-3.git) registered for path 'ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3' Submodule 'BaseTools/Source/C/BrotliCompress/brotli' (https://github.com/google/brotli) registered for path 'BaseTools/Source/C/BrotliCompress/brotli' Submodule 'CryptoPkg/Library/OpensslLib/openssl' (https://github.com/openssl/openssl) registered for path 'CryptoPkg/Library/OpensslLib/openssl' Submodule 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli' (https://github.com/google/brotli) registered for path 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli' Submodule 'MdeModulePkg/Universal/RegularExpressionDxe/oniguruma' (https://github.com/kkos/oniguruma) registered for path 'MdeModulePkg/Universal/RegularExpressionDxe/oniguruma' Submodule 'UnitTestFrameworkPkg/Library/CmockaLib/cmocka' (https://git.cryptomilk.org/projects/cmocka.git) registered for path 'UnitTestFrameworkPkg/Library/CmockaLib/cmocka' Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/ArmPkg/Library…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/UnitTestFramew…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/BaseTools/Sour…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/MdeModulePkg/U…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/CryptoPkg/Libr…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/MdeModulePkg/L…'...> Submodule path 'ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037' Submodule path 'BaseTools/Source/C/BrotliCompress/brotli': checked out '666c3280cc11dc433c303d79a83d4ffbdd12cc8d' Submodule 'research/esaxx' (https://github.com/hillbig/esaxx) registered for path 'BaseTools/Source/C/BrotliCompress/brotli/research/esaxx' Submodule 'research/libdivsufsort' (https://github.com/y-256/libdivsufsort.git) registered for path 'BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort' Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/BaseTools/Sour…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/BaseTools/Sour…'...> Submodule path 'BaseTools/Source/C/BrotliCompress/brotli/research/esaxx': checked out 'ca7cb332011ec37a8436487f210f396b84bd8273' Submodule path 'BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort': checked out '5f60d6f026c30fb4ac296f696b3c8b0eb71bd428' Submodule path 'CryptoPkg/Library/OpensslLib/openssl': checked out 'e2e09d9fba1187f8d6aafaa34d4172f56f1ffb72' Submodule 'boringssl' (https://boringssl.googlesource.com/boringssl) registered for path 'CryptoPkg/Library/OpensslLib/openssl/boringssl' Submodule 'krb5' (https://github.com/krb5/krb5) registered for path 'CryptoPkg/Library/OpensslLib/openssl/krb5' Submodule 'pyca.cryptography' (https://github.com/pyca/cryptography.git) registered for path 'CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography' Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/CryptoPkg/Libr…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/CryptoPkg/Libr…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/CryptoPkg/Libr…'...> Submodule path 'CryptoPkg/Library/OpensslLib/openssl/boringssl': checked out '2070f8ad9151dc8f3a73bffaa146b5e6937a583f' Submodule path 'CryptoPkg/Library/OpensslLib/openssl/krb5': checked out '890ca2f401924cdcb88f493950b04700bbe52db3' Submodule path 'CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography': checked out '09403100de2f6f1cdd0d484dcb8e620f1c335c8f' Submodule path 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli': checked out '666c3280cc11dc433c303d79a83d4ffbdd12cc8d' Submodule 'research/esaxx' (https://github.com/hillbig/esaxx) registered for path 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx' Submodule 'research/libdivsufsort' (https://github.com/y-256/libdivsufsort.git) registered for path 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort' Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/MdeModulePkg/L…'...> Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2/MdeModulePkg/L…'...> Submodule path 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx': checked out 'ca7cb332011ec37a8436487f210f396b84bd8273' Submodule path 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort': checked out '5f60d6f026c30fb4ac296f696b3c8b0eb71bd428' Submodule path 'MdeModulePkg/Universal/RegularExpressionDxe/oniguruma': checked out 'abfc8ff81df4067f309032467785e06975678f0d' Submodule path 'UnitTestFrameworkPkg/Library/CmockaLib/cmocka': checked out '1cc9cde3448cdd2e000886a26acf1caac2db7cf1' + git clone --depth 1 --recurse-submodules https://github.com/tianocore/edk2-platforms.git Cloning into 'edk2-platforms'... Checking out files: 70% (3475/4922) Checking out files: 71% (3495/4922) Checking out files: 72% (3544/4922) Checking out files: 73% (3594/4922) Checking out files: 74% (3643/4922) Checking out files: 75% (3692/4922) Checking out files: 76% (3741/4922) Checking out files: 77% (3790/4922) Checking out files: 78% (3840/4922) Checking out files: 79% (3889/4922) Checking out files: 80% (3938/4922) Checking out files: 81% (3987/4922) Checking out files: 82% (4037/4922) Checking out files: 83% (4086/4922) Checking out files: 84% (4135/4922) Checking out files: 85% (4184/4922) Checking out files: 86% (4233/4922) Checking out files: 87% (4283/4922) Checking out files: 88% (4332/4922) Checking out files: 89% (4381/4922) Checking out files: 90% (4430/4922) Checking out files: 91% (4480/4922) Checking out files: 92% (4529/4922) Checking out files: 93% (4578/4922) Checking out files: 94% (4627/4922) Checking out files: 95% (4676/4922) Checking out files: 96% (4726/4922) Checking out files: 97% (4775/4922) Checking out files: 98% (4824/4922) Checking out files: 99% (4873/4922) Checking out files: 100% (4922/4922) Checking out files: 100% (4922/4922), done. Submodule 'Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi' (https://github.com/riscv/opensbi) registered for path 'Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi' Cloning into '<https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/edk2-platforms/Sili…'...> Submodule path 'Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi': checked out '937caee0833115f69d697ca190001ba0aa5c7368' + git clone --depth 1 --recurse-submodules https://github.com/tianocore/edk2-non-osi.git Cloning into 'edk2-non-osi'... + fetch_enterprise_acs + git clone https://github.com/ARM-software/arm-enterprise-acs.git -b release Cloning into 'arm-enterprise-acs'... Filtering content: 22% (2/9), 390.25 MiB | 3.04 MiB/s Filtering content: 33% (3/9), 508.83 MiB | 5.96 MiB/s Filtering content: 33% (3/9), 627.56 MiB | 6.54 MiB/s Filtering content: 44% (4/9), 627.56 MiB | 6.54 MiB/s Filtering content: 44% (4/9), 746.26 MiB | 8.14 MiB/s Filtering content: 55% (5/9), 746.26 MiB | 8.14 MiB/s Filtering content: 55% (5/9), 1018.26 MiB | 7.41 MiB/s Filtering content: 66% (6/9), 1018.26 MiB | 7.41 MiB/s Filtering content: 66% (6/9), 1.23 GiB | 9.49 MiB/s Filtering content: 77% (7/9), 1.23 GiB | 9.49 MiB/s Filtering content: 77% (7/9), 1.49 GiB | 11.56 MiB/s Filtering content: 88% (8/9), 1.49 GiB | 11.56 MiB/s Filtering content: 88% (8/9), 1.76 GiB | 13.79 MiB/s Filtering content: 100% (9/9), 1.76 GiB | 13.79 MiB/s Filtering content: 100% (9/9), 1.76 GiB | 10.98 MiB/s, done. + cd arm-enterprise-acs/prebuilt_images/v20.10_REL3.0 + git lfs pull + cd - <https://ci.linaro.org/jenkins/job/ldcg-sbsa-firmware/ws/> + build_qemu + cd qemu + ./configure --target-list=aarch64-softmmu Using './build' as the directory for build output ERROR: Cannot find Ninja Build step 'Execute shell' marked build as failure

4 years

Re: [Asa-dev] [CI] SBSA ACS tests

by Marcin Juszkiewicz

W dniu 30.10.2020 o 13:03, Marcin Juszkiewicz via Asa-dev pisze: > I added new CI job: ldcg-sbsa-acs. > > It builds HEAD of qemu and edk2 and then use it to run Arm SBSA ACS > testsuite for SBSA levels 3-6. > > https://snapshots.linaro.org/ldcg/sbsa-acs/3/ has logs from each run. > > This allows us to check which components are still missing for each level. > > I created some Jira cards yesterday to list missing parts: > > ASA-65 - add PMU counters > ASA-66 - add GIC ITS support > ASA-67 - add Virtual Host Extensions (required for level 4) > ASA-68 - add SMMU (it is not detected by SBSA ACS now) > > I plan to look at those logs and create additional cards so we can see > what is still missing (or not enabled). > > Next run will have larger timeout as 30s looks a bit too short. Current situation summary: SBSA level | tests run | passed | failed ---------------------------------------- 3 | 45 | 32 | 6 4 | 87 | 44 | 13 5 | 92 | 44 | 20 6 | 102 | 44 | 29 Lot of tests were skipped.

4 years

[CI] SBSA ACS tests

by Marcin Juszkiewicz

I added new CI job: ldcg-sbsa-acs. It builds HEAD of qemu and edk2 and then use it to run Arm SBSA ACS testsuite for SBSA levels 3-6. https://snapshots.linaro.org/ldcg/sbsa-acs/3/ has logs from each run. This allows us to check which components are still missing for each level. I created some Jira cards yesterday to list missing parts: ASA-65 - add PMU counters ASA-66 - add GIC ITS support ASA-67 - add Virtual Host Extensions (required for level 4) ASA-68 - add SMMU (it is not detected by SBSA ACS now) I plan to look at those logs and create additional cards so we can see what is still missing (or not enabled). Next run will have larger timeout as 30s looks a bit too short.

4 years

Build failed in Jenkins: SBSA QEMU firmware test - just SBSA ACS #1

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/ldcg-sbsa-acs/1/display/redirect> Changes: ------------------------------------------ Started by user Marcin Juszkiewicz (marcin.juszkiewicz(a)linaro.org) Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on leg-aarch64-01-f1b55a93cb1d (docker-buster-arm64-leg) in workspace <https://ci.linaro.org/jenkins/job/ldcg-sbsa-acs/ws/> [ldcg-sbsa-acs] $ /bin/bash /tmp/jenkins16867014569957094092.sh + source common-code.sh /tmp/jenkins16867014569957094092.sh: line 7: common-code.sh: No such file or directory Build step 'Execute shell' marked build as failure

4 years

2024

2023

2022

2021

2020

Asa-dev October 2020