Add recipes that will output a Linux image and a initramfs that contains the Morello busybox and the purecap app. The glibc version can take an arbitrary Yocto image as the rootfs. The rootfs hosts two loaders: glibc and musl both can have their own shared objects.
Signed-off-by: Pawel Zalewski pzalewski@thegoodpenguin.co.uk Reviewed-by:Andrew Murray amurray@thegoodpenguin.co.uk --- conf/machine/morello-linux-glibc.conf | 25 +++ conf/machine/morello-linux-musl.conf | 15 ++ .../images/morello-initramfs-glibc.bb | 50 ++++++ .../images/morello-initramfs-musl.bb | 53 +++++++ .../images/morello-linux-glibc/files/init.sh | 62 ++++++++ .../files/initramfs.list.template | 16 ++ .../images/morello-linux-image-glibc.bb | 145 ++++++++++++++++++ .../images/morello-linux-image-musl.bb | 96 ++++++++++++ .../images/morello-linux-musl/files/init.sh | 33 ++++ .../files/initramfs.list.template | 18 +++ 10 files changed, 513 insertions(+) create mode 100644 recipes-morello/images/morello-initramfs-glibc.bb create mode 100644 recipes-morello/images/morello-initramfs-musl.bb create mode 100644 recipes-morello/images/morello-linux-glibc/files/init.sh create mode 100644 recipes-morello/images/morello-linux-glibc/files/initramfs.list.template create mode 100644 recipes-morello/images/morello-linux-image-glibc.bb create mode 100644 recipes-morello/images/morello-linux-image-musl.bb create mode 100644 recipes-morello/images/morello-linux-musl/files/init.sh create mode 100644 recipes-morello/images/morello-linux-musl/files/initramfs.list.template
diff --git a/conf/machine/morello-linux-glibc.conf b/conf/machine/morello-linux-glibc.conf index 6ed824d..c837acc 100644 --- a/conf/machine/morello-linux-glibc.conf +++ b/conf/machine/morello-linux-glibc.conf @@ -1,3 +1,28 @@ require conf/machine/include/morello-common.inc
MACHINEOVERRIDES =. "morello-linux-glibc:" + +PREFERRED_PROVIDER_virtual/kernel = "linux-morello-${MORELLO_RELEASE_VERSION}" +PREFFERED_PROVIDER_morello-linux-image = "morello-linux-image-glibc" +PREFFERED_PROVIDER_morello-initramfs = "morello-initramfs-glibc" + +BSP_GRUB_DIR ?= "${TOPDIR}/${TMPDIR_BSP}/deploy/images/morello-bsp/grub-efi" +BSP_DTB_DIR ?= "${TOPDIR}/${TMPDIR_BSP}/deploy/images/morello-bsp/trusted-firmware-a" + +TMPDIR = "${TOPDIR}/${TMPDIR_LINUX}" + +MUSL_INSTALL_DIR ?= "${libdir}/${GLOBAL_ARCH_TRIPLE}" + +IMAGE_BASENAME = "rootfs" +IMAGE_FSTYPES:append = " ext4" + +# The rootfs image that will go on a bootable drive +MORELLO_ROOTFS_IMAGE = "core-image-minimal" + +IMAGE_INSTALL:append = " linux-firmware-rtl8168" + +IMAGE_INSTALL:append = " musl-libc busybox-morello pure-cap-app" + +DISTRO ?= "poky" + +SERIAL_CONSOLES = "115200;ttyAMA0" \ No newline at end of file diff --git a/conf/machine/morello-linux-musl.conf b/conf/machine/morello-linux-musl.conf index e22493d..c059775 100644 --- a/conf/machine/morello-linux-musl.conf +++ b/conf/machine/morello-linux-musl.conf @@ -1,3 +1,18 @@ require conf/machine/include/morello-common.inc
MACHINEOVERRIDES =. "morello-linux-musl:" + +TARGET_OS ?= "linux-musl" + +PREFERRED_PROVIDER_virtual/kernel = "linux-morello-${MORELLO_RELEASE_VERSION}" +PREFFERED_PROVIDER_morello-linux-image = "morello-linux-image-musl" +PREFFERED_PROVIDER_morello-initramfs = "morello-initramfs-musl" + +TCLIBC = "musl" + +BSP_GRUB_DIR ?= "${TOPDIR}/${TMPDIR_BSP}/deploy/images/morello-bsp/grub-efi" +BSP_DTB_DIR ?= "${TOPDIR}/${TMPDIR_BSP}/deploy/images/morello-bsp/trusted-firmware-a" + +TMPDIR = "${TOPDIR}/${TMPDIR_LINUX}" + +DISTRO = "" \ No newline at end of file diff --git a/recipes-morello/images/morello-initramfs-glibc.bb b/recipes-morello/images/morello-initramfs-glibc.bb new file mode 100644 index 0000000..707842e --- /dev/null +++ b/recipes-morello/images/morello-initramfs-glibc.bb @@ -0,0 +1,50 @@ +inherit deploy nopackages + +COMPATIBLE_MACHINE = "morello-linux-glibc" +SUMMARY = "Initramfs for busybox" +DESCRIPTION = "Initramfs for busybox, bypassing the Yocto way" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +OUTPUTS_NAME = "morello-initramfs" + +DEPENDS += "virtual/morello-busybox gen-init-cpio-native" +PROVIDES = "${OUTPUTS_NAME}" + +BB_DONT_CACHE = "1" +INHIBIT_DEFAULT_DEPS = "1" + +FILESEXTRAPATHS:prepend := "${THISDIR}:" + +SRC_URI = "file://files/init.sh \ + file://files/initramfs.list.template \ + " +do_configure[noexec] = "1" +do_compile[noexec] = "1" +do_deploy[depends] = "virtual/morello-busybox:do_populate_sysroot" + + +do_install() { + + local sysroot_prefix="recipe-sysroot" + + sed -e "s@%FILES%@/files@" \ + "${WORKDIR}/files/initramfs.list.template" > "${WORKDIR}/files/initramfs.list.tmp1" + + sed -e "s@%BUSYBOX%@/${sysroot_prefix}/busybox@" \ + "${WORKDIR}/files/initramfs.list.tmp1" > "${WORKDIR}/files/initramfs.list" + + install -d ${D}/${OUTPUTS_NAME} + + rm -f ${D}/${OUTPUTS_NAME}/initramfs + + { + env -C ${WORKDIR} ${STAGING_BINDIR_NATIVE}/gen_init_cpio "${WORKDIR}/files/initramfs.list" + } > ${D}/${OUTPUTS_NAME}/initramfs + +} + +do_deploy() { + install -d ${DEPLOYDIR}/${OUTPUTS_NAME} + install ${D}/${OUTPUTS_NAME}/initramfs ${DEPLOYDIR}/${OUTPUTS_NAME}/initramfs +} +addtask deploy after do_install \ No newline at end of file diff --git a/recipes-morello/images/morello-initramfs-musl.bb b/recipes-morello/images/morello-initramfs-musl.bb new file mode 100644 index 0000000..e1124d8 --- /dev/null +++ b/recipes-morello/images/morello-initramfs-musl.bb @@ -0,0 +1,53 @@ +inherit deploy nopackages + +COMPATIBLE_MACHINE = "morello-linux-musl" +SUMMARY = "Initramfs for busybox" +DESCRIPTION = "Initramfs for busybox, bypassing the Yocto way" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +OUTPUTS_NAME = "morello-initramfs" + +DEPENDS += "virtual/morello-busybox gen-init-cpio-native pure-cap-app" +PROVIDES = "${OUTPUTS_NAME}" + +BB_DONT_CACHE = "1" +INHIBIT_DEFAULT_DEPS = "1" + +FILESEXTRAPATHS:prepend := "${THISDIR}:" + +SRC_URI = "file://files/init.sh \ + file://files/initramfs.list.template \ + " +do_configure[noexec] = "1" +do_compile[noexec] = "1" +do_deploy[depends] = "virtual/morello-busybox:do_populate_sysroot" + + +do_install() { + + local sysroot_prefix="recipe-sysroot" + + sed -e "s@%FILES%@/files@" \ + "${WORKDIR}/files/initramfs.list.template" > "${WORKDIR}/files/initramfs.list.tmp1" + + sed -e "s@%BUSYBOX%@/${sysroot_prefix}/busybox@" \ + "${WORKDIR}/files/initramfs.list.tmp1" > "${WORKDIR}/files/initramfs.list.tmp2" + + sed -e "s@%APP_DIR%@/${APP_DIR}@" \ + "${WORKDIR}/files/initramfs.list.tmp1" > "${WORKDIR}/files/initramfs.list" + + install -d ${D}/${OUTPUTS_NAME} + + rm -f ${D}/${OUTPUTS_NAME}/initramfs + + { + env -C ${WORKDIR} ${STAGING_BINDIR_NATIVE}/gen_init_cpio "${WORKDIR}/files/initramfs.list" + env -C "${STAGING_DIR_TARGET}/" find . -not -path "./sysroot-providers*" -print0 | env -C "${STAGING_DIR_TARGET}/" cpio --null --owner +0:+0 --create --format=newc + } > ${D}/${OUTPUTS_NAME}/initramfs +} + +do_deploy() { + install -d ${DEPLOYDIR}/${OUTPUTS_NAME} + install ${D}/${OUTPUTS_NAME}/initramfs ${DEPLOYDIR}/${OUTPUTS_NAME}/initramfs +} +addtask deploy after do_install \ No newline at end of file diff --git a/recipes-morello/images/morello-linux-glibc/files/init.sh b/recipes-morello/images/morello-linux-glibc/files/init.sh new file mode 100644 index 0000000..d98f607 --- /dev/null +++ b/recipes-morello/images/morello-linux-glibc/files/init.sh @@ -0,0 +1,62 @@ +#!/bin/busybox sh + +mount() { + /bin/busybox mount "$@" +} + +umount() { + /bin/busybox umount "$@" +} + +grep() { + /bin/busybox grep "$@" +} + +cp() { + /bin/busybox cp "$@" +} + +mkdir() { + /bin/busybox mkdir "$@" +} + +switch_root () { + /bin/busybox switch_root "$@" +} + +sed () { + /bin/busybox sed "$@" +} + +echo "Running init script" + +mount -t proc proc /proc +grep -qE $'\t'"devtmpfs$" /proc/filesystems && mount -t devtmpfs dev /dev +mount -t sysfs sysfs /sys + +echo "Installing busybox..." + +/bin/busybox --install -s + +! grep -qE $'\t'"devtmpfs$" /proc/filesystems && mdev -s + +ROOT="/newroot" + +PARTUUID=$(cat proc/cmdline | sed 's/ /\n/g' | sed -n 's/^root=PARTUUID=*//p') + +DEVID=$(blkid | sed -n "s/UUID="$PARTUUID" TYPE="ext4"*//p" | sed 's/://') + +echo "Mounting ${DEVID} rootfs with PARTUUID: ${PARTUUID}" + +mount ${DEVID} ${ROOT} + +ulimit -c unlimited + +cd ${ROOT} +exec switch_root . /sbin/init </dev/ttyAMA0 >dev/ttyAMA0 2>&1 + +echo "/bin/sh as PID 1!" +echo "init.sh" +exec setsid cttyhack sh +echo setsid ctty hack failed so "exec /bin/sh" fallback will be used +exec /bin/sh \ No newline at end of file diff --git a/recipes-morello/images/morello-linux-glibc/files/initramfs.list.template b/recipes-morello/images/morello-linux-glibc/files/initramfs.list.template new file mode 100644 index 0000000..da55738 --- /dev/null +++ b/recipes-morello/images/morello-linux-glibc/files/initramfs.list.template @@ -0,0 +1,16 @@ +dir /bin 755 0 0 +dir /include 755 0 0 +dir /lib 755 0 0 +dir /share 755 0 0 +dir /dev 755 0 0 +dir /proc 755 0 0 +dir /sbin 755 0 0 +dir /sys 755 0 0 +dir /newroot 755 0 0 +dir /usr 755 0 0 +dir /usr/lib 755 0 0 +dir /usr/bin 755 0 0 +dir /etc 755 0 0 + +file /bin/busybox .%BUSYBOX%/busybox 755 0 0 +file /init .%FILES%/init.sh 755 0 0 \ No newline at end of file diff --git a/recipes-morello/images/morello-linux-image-glibc.bb b/recipes-morello/images/morello-linux-image-glibc.bb new file mode 100644 index 0000000..135ce9a --- /dev/null +++ b/recipes-morello/images/morello-linux-image-glibc.bb @@ -0,0 +1,145 @@ +inherit deploy nopackages + +COMPATIBLE_MACHINE = "morello-linux-glibc" +SUMMARY = "Bootable Morello Linux Image" +DESCRIPTION = "Image that goes on a bootable device, can be DD'ed onto a USB stick" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +OUTPUTS_NAME = "morello-linux-image" + +INHIBIT_DEFAULT_DEPS = "1" + +DEPENDS += "virtual/kernel morello-initramfs mtools-native e2fsprogs-native coreutils-native bc-native util-linux-native" +PROVIDES = "${OUTPUTS_NAME}" + +ESP_SIZE = "100" +BOOT_SECTORS = "204800" + +LBA = "512" +PART_START_ALIGNMENT = "2048" + +ESP_IMAGE = "${OUTPUTS_NAME}-esp" + +ROOTFS = "${DEPLOY_DIR}/images/morello-linux-glibc/rootfs-morello-linux-glibc.ext4" + +do_compile[noexec] = "1" +do_configure[depends] += "${MORELLO_ROOTFS_IMAGE}:do_image_complete morello-initramfs:do_deploy" +do_configure[mcdepends] += "mc:${BB_CURRENT_MC}:morello-firmware:board-firmware-image:do_deploy" + +def get_next_part_start (d): + next_image_start = int(d.getVar('BOOT_SECTORS')) + int(d.getVar('PART_START_ALIGNMENT')) + int(d.getVar('PART_START_ALIGNMENT')) - 1 + next_image_start = next_image_start & ~(int(d.getVar('PART_START_ALIGNMENT')) -1) + return next_image_start + +mult() { + local ret=$(echo "${1} * ${2}" | bc) + echo ${ret} +} + +add() { + local ret=$(echo "${1} + ${2}" | bc) + echo ${ret} +} + +div() { + local ret=$(echo "${1} / ${2}" | bc) + echo ${ret} +} + +get_size() { + local link=$(readlink -f ${1}) + local size=$(stat --dereference --format="%s" ${link}) + local ret=${size% *} + echo ${ret} +} + +add_to_image() { + mcopy -i ${1} -m -D overwrite ${2} ::${3} +} + +get_uuid() { + local part="$(blkid ${1})" + local tmp=${part#*"} + local uuid=$(echo $tmp | head -c 36) + echo ${uuid} +} + +create_gpt() { + + local esp_type="C12A7328-F81F-11D2-BA4B-00A0C93EC93B" + local linux_type="0FC63DAF-8483-4772-8E79-3D69D8477DE4" + + local part_start_esp=${PART_START_ALIGNMENT} + local part_start_linux="${@get_next_part_start(d)}" + + local size=$(get_size ${ROOTFS}) + local tmp=$(add ${size} ${LBA}) + + local rootfs_sectors=$(div ${tmp} ${LBA}) + local rootfs_uuid=$(get_uuid ${ROOTFS}) + + echo "Sectors $rootfs_sectors ${BOOT_SECTORS}" + + { + echo "label: gpt" + echo "start=${part_start_esp}, size=${BOOT_SECTORS}, name=ESP, type=${esp_type}" + echo "start=${part_start_linux}, size=${rootfs_sectors}, name=root, type=${linux_type}, uuid=${rootfs_uuid}" + } | sfdisk -q "${1}" + + dd if="${2}" of="${1}" seek=$(mult ${part_start_esp} ${LBA}) bs=8M conv=notrunc,sparse oflag=seek_bytes status=progress + dd if="${3}" of="${1}" seek=$(mult ${part_start_linux} ${LBA}) bs=8M conv=notrunc,sparse oflag=seek_bytes status=progress +} + +do_configure() { + local grub="${BSP_GRUB_DIR}/grub-config.cfg" + local uuid=$(get_uuid ${ROOTFS}) + echo ${uuid} + rm -f ${BSP_GRUB_DIR}/grub-config.cfg.processed + sed -e "s@%UUID%@${uuid}@" \ + "${BSP_GRUB_DIR}/grub-config.cfg" > "${BSP_GRUB_DIR}/grub-config.cfg.processed" +} + +do_install() { + + local part0="${BSP_GRUB_DIR}/grub-efi-bootaa64.efi" + local part1="${BSP_GRUB_DIR}/grub-config.cfg.processed" + local part2="${BSP_DTB_DIR}/morello-soc.dtb" + local part3="${DEPLOY_DIR}/images/morello-linux-glibc/Image" + local part4="${DEPLOY_DIR}/images/morello-linux-glibc/morello-initramfs/initramfs" + + rm -f ${ESP_IMAGE}.img + + # create the ESP + dd if=/dev/zero of=${ESP_IMAGE}.img bs=1024K count=${ESP_SIZE} + mformat -i ${ESP_IMAGE}.img -v ESP :: + + mmd -i ${ESP_IMAGE}.img ::/EFI + mmd -i ${ESP_IMAGE}.img ::/EFI/BOOT + + add_to_image ${ESP_IMAGE}.img ${part0} /EFI/BOOT/BOOTAA64.EFI + add_to_image ${ESP_IMAGE}.img ${part1} /EFI/BOOT/grub.cfg + add_to_image ${ESP_IMAGE}.img ${part2} /morello.dtb + add_to_image ${ESP_IMAGE}.img ${part3} /Image + add_to_image ${ESP_IMAGE}.img ${part4} /initramfs + + local size=$(get_size ${ROOTFS}) + + local rootfs_size=$(div ${size} 1048576) + local total_size=$(add ${ESP_SIZE} ${rootfs_size}) + + : > ${OUTPUTS_NAME}.img + truncate --size="$(add ${total_size} 50)M" ${OUTPUTS_NAME}.img + + create_gpt ${OUTPUTS_NAME}.img ${ESP_IMAGE}.img ${ROOTFS} ${size} + + install ${OUTPUTS_NAME}.img ${D}/${OUTPUTS_NAME}.img + install ${ESP_IMAGE}.img ${D}/${ESP_IMAGE}.img +} + +do_deploy() { + install -d ${DEPLOYDIR}/ESP + install ${D}/${OUTPUTS_NAME}.img ${DEPLOYDIR}/${OUTPUTS_NAME}-${MORELLO_ARCH}-${TCLIBC}.img + install ${D}/${ESP_IMAGE}.img ${DEPLOYDIR}/ESP/${ESP_IMAGE}.img + +} +addtask deploy after do_install \ No newline at end of file diff --git a/recipes-morello/images/morello-linux-image-musl.bb b/recipes-morello/images/morello-linux-image-musl.bb new file mode 100644 index 0000000..7b5e6eb --- /dev/null +++ b/recipes-morello/images/morello-linux-image-musl.bb @@ -0,0 +1,96 @@ +inherit deploy nopackages + +COMPATIBLE_MACHINE = "morello-linux-musl" +SUMMARY = "Bootable Morello Linux Image" +DESCRIPTION = "Image that goes on a bootable device, can be DD'ed onto a USB stick" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +OUTPUTS_NAME = "morello-linux-image" + +INHIBIT_DEFAULT_DEPS = "1" + +DEPENDS += "virtual/kernel morello-initramfs mtools-native e2fsprogs-native coreutils-native bc-native util-linux-native" +PROVIDES = "${OUTPUTS_NAME}" + +IMAGE_SIZE = "100" + +IMAGE_SECTORS = "204800" + +LBA = "512" +PART_START_ALIGNMENT = "2048" + +ESP_IMAGE = "${OUTPUTS_NAME}-esp" + +do_configure[noexec] = "1" +do_compile[noexec] = "1" +do_install[mcdepends] = "mc:${BB_CURRENT_MC}:morello-firmware:board-firmware-image:do_deploy" + +def get_next_part_start (d): + next_image_start = int(d.getVar('IMAGE_SECTORS')) + int(d.getVar('PART_START_ALIGNMENT')) + int(d.getVar('PART_START_ALIGNMENT')) - 1 + next_image_start = next_image_start & ~(int(d.getVar('PART_START_ALIGNMENT')) -1) + return next_image_start + +add_to_image() { + mcopy -i ${1} -m -D overwrite ${2} ::${3} +} + +mult() { + local ret=$(echo "${1} * ${2}" | bc) + echo ${ret} +} + +create_gpt() { + + local esp_type="C12A7328-F81F-11D2-BA4B-00A0C93EC93B" + local linux_type="0FC63DAF-8483-4772-8E79-3D69D8477DE4" + + local part_start_esp=${PART_START_ALIGNMENT} + local part_start_linux="${@get_next_part_start(d)}" + + { + echo "label: gpt" + echo "start=${part_start_esp}, size=${IMAGE_SECTORS}, name=ESP, type=${esp_type}" + echo "start=${part_start_linux}, size=${IMAGE_SECTORS}, name=root, type=${linux_type}" + } | sfdisk -q "${1}" + + dd if="${2}" of="${1}" seek=$(mult ${part_start_esp} ${LBA}) bs=8M conv=notrunc,sparse oflag=seek_bytes status=progress + dd if="${3}" of="${1}" seek=$(mult ${part_start_linux} ${LBA}) bs=8M conv=notrunc,sparse oflag=seek_bytes status=progress +} + +do_install() { + + local part0="${BSP_GRUB_DIR}/grub-efi-bootaa64.efi" + local part1="${BSP_GRUB_DIR}/grub-config.cfg" + local part2="${BSP_DTB_DIR}/morello-soc.dtb" + local part3="${DEPLOY_DIR}/images/morello-linux-musl/Image" + local part4="${DEPLOY_DIR}/images/morello-linux-musl/morello-initramfs/initramfs" + + # create empty ext4 rootfs + : > ${D}/root.img + truncate --size="${IMAGE_SIZE}M" ${D}/root.img + mkfs.ext4 ${D}/root.img + + # create the ESP + dd if=/dev/zero of=${ESP_IMAGE}.img bs=1024K count=${IMAGE_SIZE} + mformat -i ${ESP_IMAGE}.img -v ESP :: + + mmd -i ${ESP_IMAGE}.img ::/EFI + mmd -i ${ESP_IMAGE}.img ::/EFI/BOOT + + add_to_image ${ESP_IMAGE}.img ${part0} /EFI/BOOT/BOOTAA64.EFI + add_to_image ${ESP_IMAGE}.img ${part1} /EFI/BOOT/grub.cfg + add_to_image ${ESP_IMAGE}.img ${part2} /morello.dtb + add_to_image ${ESP_IMAGE}.img ${part3} /Image + add_to_image ${ESP_IMAGE}.img ${part4} /initramfs + + : > ${OUTPUTS_NAME}.img + truncate --size="$(mult ${IMAGE_SIZE} 3)M" ${OUTPUTS_NAME}.img + + create_gpt ${OUTPUTS_NAME}.img ${ESP_IMAGE}.img /home/pawel/Code/ArmMorello/linux/output/root.img + install ${OUTPUTS_NAME}.img ${D}/${OUTPUTS_NAME}.img +} + +do_deploy() { + install ${D}/${OUTPUTS_NAME}.img ${DEPLOYDIR}/${OUTPUTS_NAME}-${MORELLO_ARCH}-${TCLIBC}.img +} +addtask deploy after do_install \ No newline at end of file diff --git a/recipes-morello/images/morello-linux-musl/files/init.sh b/recipes-morello/images/morello-linux-musl/files/init.sh new file mode 100644 index 0000000..7c1aa8d --- /dev/null +++ b/recipes-morello/images/morello-linux-musl/files/init.sh @@ -0,0 +1,33 @@ +#!/bin/busybox sh + +# Copyright (c) 2021 Arm Limited. All rights reserved. +# +# SPDX-License-Identifier: BSD-3-Clause + +mount() { + /bin/busybox mount "$@" +} + +grep() { + /bin/busybox grep "$@" +} + +echo "Running init script" + +mount -t proc proc /proc +grep -qE $'\t'"devtmpfs$" /proc/filesystems && mount -t devtmpfs dev /dev +mount -t sysfs sysfs /sys + +echo "Installing busybox" + +/bin/busybox --install -s + +! grep -qE $'\t'"devtmpfs$" /proc/filesystems && mdev -s + +ulimit -c unlimited + +echo "/bin/sh as PID 1!" +echo "init.sh" +exec setsid cttyhack sh +echo setsid ctty hack failed so "exec /bin/sh" fallback will be used +exec /bin/sh diff --git a/recipes-morello/images/morello-linux-musl/files/initramfs.list.template b/recipes-morello/images/morello-linux-musl/files/initramfs.list.template new file mode 100644 index 0000000..3da25be --- /dev/null +++ b/recipes-morello/images/morello-linux-musl/files/initramfs.list.template @@ -0,0 +1,18 @@ +dir /bin 755 0 0 +dir /include 755 0 0 +dir /lib 755 0 0 +dir /share 755 0 0 +dir /dev 755 0 0 +dir /proc 755 0 0 +dir /sbin 755 0 0 +dir /sys 755 0 0 +dir /newroot 755 0 0 +dir /usr 755 0 0 +dir /usr/lib 755 0 0 +dir /usr/bin 755 0 0 +dir /etc 755 0 0 + +dir /%APP_DIR% 755 0 0 + +file /bin/busybox .%BUSYBOX%/busybox 755 0 0 +file /init .%FILES%/init.sh 755 0 0 \ No newline at end of file