The virtio documentation currently doesn't define any generic
requirements that are applicable to all transports. They can be useful
while adding support for a new transport.
This commit tries to define the same.
Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org>
---
V1->V2:
- Lot of changes after discussions with Alex and Cornelia.
- Almost a rewrite of the first commit.
- Add Transport normative sections.
commands.tex | 1 +
conformance.tex | 14 +++++++++
content.tex | 78 +++++++++++++++++++++++++++++++++++++++++++++++--
3 files changed, 91 insertions(+), 2 deletions(-)
diff --git a/commands.tex b/commands.tex
index 25ea8ee3bc78..692ef0833a88 100644
--- a/commands.tex
+++ b/commands.tex
@@ -8,6 +8,7 @@
\newcommand{\field}[1]{\emph{#1}}
% Mark a normative section (driver or device)
+\newcommand{\transportnormative}[3]{#1{Transport Requirements: #2}\label{transportnormative:#3}}
\newcommand{\drivernormative}[3]{#1{Driver Requirements: #2}\label{drivernormative:#3}}
\newcommand{\devicenormative}[3]{#1{Device Requirements: #2}\label{devicenormative:#3}}
\newcounter{clausecounter}
diff --git a/conformance.tex b/conformance.tex
index dc00e84e75ae..9bb1c9e2f6ec 100644
--- a/conformance.tex
+++ b/conformance.tex
@@ -11,6 +11,10 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
Conformance targets:
\begin{description}
+\item[Transport] A transport MUST conform to following conformance clauses:
+ \begin{itemize}
+ \item Clause \ref{sec:Conformance / Transport Conformance}.
+ \end{itemize}
\item[Driver] A driver MUST conform to four conformance clauses:
\begin{itemize}
\item Clause \ref{sec:Conformance / Driver Conformance}.
@@ -66,6 +70,14 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
\end{itemize}
\end{description}
+\conformance{\section}{Transport Conformance}\label{sec:Conformance / Transport Conformance}
+
+A transport MUST conform to the following normative statements:
+
+\begin{itemize}
+\item \ref{transportnormative:Virtio Transport Options / Virtio Transport Requirements}
+\end{itemize}
+
\conformance{\section}{Driver Conformance}\label{sec:Conformance / Driver Conformance}
A driver MUST conform to the following normative statements:
@@ -93,6 +105,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
\item \ref{drivernormative:Basic Facilities of a Virtio Device / Packed Virtqueues / Supplying Buffers to The Device / Sending Available Buffer Notifications}
\item \ref{drivernormative:General Initialization And Device Operation / Device Initialization}
\item \ref{drivernormative:General Initialization And Device Operation / Device Cleanup}
+\item \ref{drivernormative:Virtio Transport Options / Virtio Transport Requirements}
\item \ref{drivernormative:Reserved Feature Bits}
\end{itemize}
@@ -172,6 +185,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
\item \ref{devicenormative:Basic Facilities of a Virtio Device / Packed Virtqueues / The Virtqueue Descriptor Table}
\item \ref{devicenormative:Basic Facilities of a Virtio Device / Packed Virtqueues / Scatter-Gather Support}
\item \ref{devicenormative:Basic Facilities of a Virtio Device / Shared Memory Regions}
+\item \ref{devicenormative:Virtio Transport Options / Virtio Transport Requirements}
\item \ref{devicenormative:Reserved Feature Bits}
\end{itemize}
diff --git a/content.tex b/content.tex
index 0a62dce5f65f..a79993b5ed69 100644
--- a/content.tex
+++ b/content.tex
@@ -631,8 +631,82 @@ \section{Device Cleanup}\label{sec:General Initialization And Device Operation /
\chapter{Virtio Transport Options}\label{sec:Virtio Transport Options}
-Virtio can use various different buses, thus the standard is split
-into virtio general and bus-specific sections.
+Devices and drivers can use different transport methods to enable
+interaction, for example PCI, MMIO, or Channel I/O. The transport
+methods define various aspects of the communication between the device
+and the driver, like device discovery, exchanging capabilities,
+interrupt handling, data transfer, etc. For example, in a host/guest
+architecture, the host might expose a device to the guest on a PCI bus,
+and the guest will use a PCI-specific driver to interact with it.
+
+The standard is split into sections describing general virtio
+implementation and transport-specific sections.
+
+\section{Virtio Transport Requirements}\label{sec:Virtio Transport Options / Virtio Transport Requirements}
+
+\transportnormative{\subsection}{Virtio Transport Requirements}{Virtio Transport Options / Virtio Transport Requirements}
+The transport MUST provide a mechanism for the driver to discover the
+device.
+
+The transport MUST provide a mechanism for the driver to identify the
+device type.
+
+The transport MUST provide a mechanism for communicating virtqueue
+configurations between the device and the driver.
+
+The transport MUST allow multiple virtqueues per device. The number of
+virtqueues for a pair of device-driver are governed by the individual
+device protocol.
+
+The transport MUST provide a mechanism that the device and the driver
+use to access memory for implementing virtqueues.
+
+The transport MUST provide a mechanism for the device to notify the
+driver and a mechanism for the driver to notify the device, for example
+regarding availability of a buffer on the virtqueue.
+
+The transport MAY provide a mechanism for the driver to initiate a
+reset of the virtqueues and device.
+
+The transport SHOULD provide a mechanism for the driver to read the
+device status. The transport MUST provide a mechanism for the driver to
+change the device status.
+
+The transport MUST provide a mechanism to implement config space between
+the device and the driver.
+
+\devicenormative{\subsection}{Virtio Transport Requirements}{Virtio Transport Options / Virtio Transport Requirements}
+
+The device MUST keep any data associated with a device-initiated
+transaction accessible to the driver until the driver acknowledges the
+transaction to be complete.
+
+The device MUST NOT access the contents of a virtqueue before the
+driver notifies, in a transport defined way, the device that the
+virtqueue is ready to be accessed.
+
+The device MUST NOT access or modify buffers on a virtqueue after it has
+notified the driver about their availability.
+
+The device MUST reset the virtqueues if requested by the driver, in a
+transport defined way, if the transport provides such a method.
+
+\drivernormative{\subsection}{Virtio Transport Requirements}{Virtio Transport Options / Virtio Transport Requirements}
+
+The driver MUST acknowledge device notifications, as mandated by the
+transport.
+
+The driver MUST NOT access virtqueue contents before the device notifies
+about the readiness of the same.
+
+The driver MUST NOT access buffers, after it has added them to the
+virtqueue and notified the device about their availability. The driver
+MAY access them after the device has processed them and notified the
+driver of their availability, in a transport defined way.
+
+The driver MAY ask the device to reset the virtqueues if, for example,
+the driver times out waiting for a notification from the device for a
+previously queued request.
\input{transport-pci.tex}
\input{transport-mmio.tex}
--
2.31.1.272.g89b43f80a514
