November 2022 - Stratos-dev - op-lists.linaro.org

[PATCH V6 0/3] Virtio toolstack support for I2C and GPIO on Arm

by Viresh Kumar

Hello, This patchset adds toolstack support for I2C and GPIO virtio devices. This is inspired from the work done by Oleksandr for the Disk device. This is developed as part of Linaro's Project Stratos, where we are working towards Hypervisor agnostic Rust based backend [1]. This is based of origin/staging (e61a78981364 xen/arm: add iounmap after initrd has been loaded in domain_build) and the earlier posted cleanup patches [2]. V5->V6: - The cleanup patches are sent separately [2]. - We don't add I2C or GPIO specific device changes anymore, rather we create generic "virtio" devices. The "type" of a virtio devices helps us identify the right device, and create an entry in the DT node. The same can be used for all Virtio devices now. - Update man page xl.cfg. V4->V5: - Fixed indentation at few places. - Removed/added blank lines. - Added few comments. - Added review tags from Oleksandr. - Rebased over latest staging branch. V3->V4: - Update virtio_enabled independently of all devices, so we don't miss setting it to true. - Add iommu handling for i2c/gpio and move it as part of make_virtio_mmio_node_common(), which gets backend_domid parameter as a result. V2->V3: - Rebased over latest tree and made changes according to changes in Oleksandr's patches from sometime back. - Minor cleanups. V1->V2: - Patches 3/6 and 4/6 are new. - Patches 5/6 and 6/6 updated based on the above two patches. - Added link to the bindings for I2C and GPIO. - Rebased over latest master branch. Thanks. -- Viresh [1] https://lore.kernel.org/xen-devel/20220414092358.kepxbmnrtycz7mhe@vireshk-i… [2] https://lore.kernel.org/all/cover.1662626550.git.viresh.kumar@linaro.org/ Viresh Kumar (3): libxl: Add support for generic virtio device xl: Add support to parse generic virtio device docs: Add documentation for generic virtio devices docs/man/xl.cfg.5.pod.in | 21 ++++ tools/libs/light/Makefile | 1 + tools/libs/light/libxl_arm.c | 89 +++++++++++++++ tools/libs/light/libxl_create.c | 5 + tools/libs/light/libxl_internal.h | 1 + tools/libs/light/libxl_types.idl | 29 +++++ tools/libs/light/libxl_types_internal.idl | 1 + tools/libs/light/libxl_virtio.c | 127 ++++++++++++++++++++++ tools/ocaml/libs/xl/genwrap.py | 1 + tools/ocaml/libs/xl/xenlight_stubs.c | 1 + tools/xl/xl_parse.c | 84 ++++++++++++++ 11 files changed, 360 insertions(+) create mode 100644 tools/libs/light/libxl_virtio.c -- 2.31.1.272.g89b43f80a514

2 years

3
18
0 0

[PATCH V6 0/3] libxl: arm: Make generic code independent of disk device

by Viresh Kumar

Hello, This was earlier sent as part of a patch series [1] adding support for GPIO/I2C virtio devices. The device specific patches would require some rework and possibly several versions, and so this series separates out the generic independent patches into a series of their own. This series makes some of the generic code independent of the disk device, since it can be used for other device types later on. Rebased over staging branch from today. V5->V6: - Separated into a patch series of their own. - Updated commit log of 1st patch to cover all changes. - Rename make_virtio_mmio_node_simple() as make_virtio_mmio_node(). - New patch 3/3, separated code from device specific patch. -- Viresh Viresh Kumar (3): libxl: arm: Create alloc_virtio_mmio_params() libxl: arm: Split make_virtio_mmio_node() libxl: arm: make creation of iommu node independent of disk device tools/libs/light/libxl_arm.c | 83 +++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 26 deletions(-) -- 2.31.1.272.g89b43f80a514 -- Viresh [1] https://lore.kernel.org/all/cover.1661159474.git.viresh.kumar@linaro.org/

2 years, 1 month

4
14
0 0

[libgpiod][PATCH V10 0/6] libgpiod: Add Rust bindings

by Viresh Kumar

Hello, Here is another version of the rust bindings, based of the master branch. Pushed here: https://github.com/vireshk/libgpiod v10 V9->V10: - Removed auto-built bindings.rs files. - Updated license and copyright information for all files. - Renamed gpiosim crate as gpiosim-sys. - Cargo specific .gitnore changes moved to bindings/rust/.gitignore. - Fixed few SAFETY comments. - Added Reviewed-by tag from Kent. Since the changes were all minor, I haven't dropped them. V8->V9: - Merged the last patch (supporting Events) with the other patches. - Events implementation is simplified and made efficient. nth() is also implemented for the iterator. - Unnecessary comment removed from Cargo.toml files. - Updated categories in libgpiod's Cargo.toml. - Updated gpio_events example to show cloned events live past another read_edge_events(). - Implement AsRawFd for Chip. - Other minor changes. V7->V8: - Several updates to cargo.toml files, like license, version, etc. - Removed Sync support for chip and gpiosim. - Implemented, in a separate patch, iterator support for Events. - Fixed missing SAFETY comments. - Fixed build for 32 bit systems. - Use errno::Errno. - Removed Clone derive for many structures, that store raw pointers. - line setting helpers return the object back, so another helper can be called directly on them. Also made all helpers public and used the same in tests and example for single configurations. - Enums for gpiosim constants. - New examples to demonstrate parallelism and event handling. - Separated out HTE tests and marked as #[ignore] now. - Updated commit subjects. - Other minor changes. V6->V7: - Don't let buffer read new events if the earlier events are still referenced. - BufferIntenal is gone now, to make the above work. - Update example and tests too for the same. V5->V6: - Updates according to the new line-settings interface. - New file, line_settings.rs. - Renamed 'enum Setting' as 'SettingVal' to avoid conflicting names, as we also have 'struct Settings' now. - Support for HTE clock type. - Implement 'Eq' for public structure/enums (reported by build). - Remove 'SettingKindMap' and 'SettingMap' as they aren't required anymore. - Updated tests based on new interface. V4->V5: - Arrange as workspace with crates for libgpiod-sys, libgpiod, gpiosim. - Use static libgpiod and libgpiosim libraries instead of rebuilding again. - Arrange in modules instead of flattened approach. - New enums like Setting and SettingKind and new types based on them SettingMap and SettingKindMap. - New property independent helpers for line_config, like set_prop_default(). - Improved tests/examples, new example for gpiowatch. - Add pre-built bindings for gpiosim too. - Many other changes. V3->V4: - Rebased on top of new changes, and made changes accordingly. - Added rust integration tests with gpiosim. - Found a kernel bug with tests, sent a patch for that to LKML. V2->V3: - Remove naming redundancy, users just need to do this now use libgpiod:{Chip, Direction, LineConfig} now (Bartosz); - Fix lifetime issues between event-buffer and edge-event modules, the event buffer is released after the last edge-event reference is dropped (Bartosz). - Allow edge-event to be copied, and freed later (Bartosz). - Add two separate rust crates, sys and wrapper (Gerard). - Null-terminate the strings passed to libgpiod (Wedson). - Drop unnecessary checks to validate string returned from chip:name/label/path. - Fix SAFETY comments (Wedson). - Drop unnecessary clone() instances (Bartosz). V1->V2: - Added examples (I tested everything except gpiomon.rs, didn't have right hardware/mock device to test). - Build rust bindings as part of Make, update documentation. Thanks. -- Viresh Viresh Kumar (6): bindings: rust: Add libgpiod-sys rust crate bindings: rust: Add libgpiod crate bindings: rust: Add gpiosim-sys crate bindings: rust: Add examples to libgpiod crate bindings: rust: Add tests for libgpiod crate bindings: rust: Integrate building of bindings with make README | 8 +- TODO | 8 - bindings/Makefile.am | 6 + bindings/rust/.gitignore | 4 + bindings/rust/Cargo.toml | 11 + bindings/rust/Makefile.am | 19 + bindings/rust/gpiosim-sys/Cargo.toml | 23 + bindings/rust/gpiosim-sys/README.md | 14 + bindings/rust/gpiosim-sys/build.rs | 43 ++ bindings/rust/gpiosim-sys/src/lib.rs | 74 +++ bindings/rust/gpiosim-sys/src/sim.rs | 330 ++++++++++++ bindings/rust/libgpiod-sys/Cargo.toml | 21 + bindings/rust/libgpiod-sys/README.md | 14 + bindings/rust/libgpiod-sys/build.rs | 41 ++ bindings/rust/libgpiod-sys/src/lib.rs | 11 + bindings/rust/libgpiod/Cargo.toml | 25 + .../rust/libgpiod/examples/gpio_events.rs | 88 +++ .../examples/gpio_threaded_info_events.rs | 132 +++++ bindings/rust/libgpiod/examples/gpiodetect.rs | 30 ++ bindings/rust/libgpiod/examples/gpiofind.rs | 36 ++ bindings/rust/libgpiod/examples/gpioget.rs | 45 ++ bindings/rust/libgpiod/examples/gpioinfo.rs | 97 ++++ bindings/rust/libgpiod/examples/gpiomon.rs | 74 +++ bindings/rust/libgpiod/examples/gpioset.rs | 63 +++ bindings/rust/libgpiod/examples/gpiowatch.rs | 53 ++ bindings/rust/libgpiod/src/chip.rs | 309 +++++++++++ bindings/rust/libgpiod/src/edge_event.rs | 92 ++++ bindings/rust/libgpiod/src/event_buffer.rs | 168 ++++++ bindings/rust/libgpiod/src/info_event.rs | 68 +++ bindings/rust/libgpiod/src/lib.rs | 478 ++++++++++++++++ bindings/rust/libgpiod/src/line_config.rs | 134 +++++ bindings/rust/libgpiod/src/line_info.rs | 161 ++++++ bindings/rust/libgpiod/src/line_request.rs | 226 ++++++++ bindings/rust/libgpiod/src/line_settings.rs | 296 ++++++++++ bindings/rust/libgpiod/src/request_config.rs | 94 ++++ bindings/rust/libgpiod/tests/chip.rs | 97 ++++ bindings/rust/libgpiod/tests/common/config.rs | 142 +++++ bindings/rust/libgpiod/tests/common/mod.rs | 9 + bindings/rust/libgpiod/tests/edge_event.rs | 297 ++++++++++ bindings/rust/libgpiod/tests/info_event.rs | 166 ++++++ bindings/rust/libgpiod/tests/line_config.rs | 95 ++++ bindings/rust/libgpiod/tests/line_info.rs | 275 ++++++++++ bindings/rust/libgpiod/tests/line_request.rs | 509 ++++++++++++++++++ bindings/rust/libgpiod/tests/line_settings.rs | 203 +++++++ .../rust/libgpiod/tests/request_config.rs | 38 ++ configure.ac | 16 + 46 files changed, 5132 insertions(+), 11 deletions(-) create mode 100644 bindings/rust/.gitignore create mode 100644 bindings/rust/Cargo.toml create mode 100644 bindings/rust/Makefile.am create mode 100644 bindings/rust/gpiosim-sys/Cargo.toml create mode 100644 bindings/rust/gpiosim-sys/README.md create mode 100644 bindings/rust/gpiosim-sys/build.rs create mode 100644 bindings/rust/gpiosim-sys/src/lib.rs create mode 100644 bindings/rust/gpiosim-sys/src/sim.rs create mode 100644 bindings/rust/libgpiod-sys/Cargo.toml create mode 100644 bindings/rust/libgpiod-sys/README.md create mode 100644 bindings/rust/libgpiod-sys/build.rs create mode 100644 bindings/rust/libgpiod-sys/src/lib.rs create mode 100644 bindings/rust/libgpiod/Cargo.toml create mode 100644 bindings/rust/libgpiod/examples/gpio_events.rs create mode 100644 bindings/rust/libgpiod/examples/gpio_threaded_info_events.rs create mode 100644 bindings/rust/libgpiod/examples/gpiodetect.rs create mode 100644 bindings/rust/libgpiod/examples/gpiofind.rs create mode 100644 bindings/rust/libgpiod/examples/gpioget.rs create mode 100644 bindings/rust/libgpiod/examples/gpioinfo.rs create mode 100644 bindings/rust/libgpiod/examples/gpiomon.rs create mode 100644 bindings/rust/libgpiod/examples/gpioset.rs create mode 100644 bindings/rust/libgpiod/examples/gpiowatch.rs create mode 100644 bindings/rust/libgpiod/src/chip.rs create mode 100644 bindings/rust/libgpiod/src/edge_event.rs create mode 100644 bindings/rust/libgpiod/src/event_buffer.rs create mode 100644 bindings/rust/libgpiod/src/info_event.rs create mode 100644 bindings/rust/libgpiod/src/lib.rs create mode 100644 bindings/rust/libgpiod/src/line_config.rs create mode 100644 bindings/rust/libgpiod/src/line_info.rs create mode 100644 bindings/rust/libgpiod/src/line_request.rs create mode 100644 bindings/rust/libgpiod/src/line_settings.rs create mode 100644 bindings/rust/libgpiod/src/request_config.rs create mode 100644 bindings/rust/libgpiod/tests/chip.rs create mode 100644 bindings/rust/libgpiod/tests/common/config.rs create mode 100644 bindings/rust/libgpiod/tests/common/mod.rs create mode 100644 bindings/rust/libgpiod/tests/edge_event.rs create mode 100644 bindings/rust/libgpiod/tests/info_event.rs create mode 100644 bindings/rust/libgpiod/tests/line_config.rs create mode 100644 bindings/rust/libgpiod/tests/line_info.rs create mode 100644 bindings/rust/libgpiod/tests/line_request.rs create mode 100644 bindings/rust/libgpiod/tests/line_settings.rs create mode 100644 bindings/rust/libgpiod/tests/request_config.rs -- 2.31.1.272.g89b43f80a514

2 years, 1 month

4
15
0 0

[libgpiod][PATCH V9 0/8] libgpiod: Add Rust bindings

by Viresh Kumar

Hello, Here is another version of the rust bindings, based of the master branch. Pushed here: https://github.com/vireshk/libgpiod v9 V8->V9: - Merged the last patch (supporting Events) with the other patches. - Events implementation is simplified and made efficient. nth() is also implemented for the iterator. - Unnecessary comment removed from Cargo.toml files. - Updated categories in libgpiod's Cargo.toml. - Updated gpio_events example to show cloned events live past another read_edge_events(). - Implement AsRawFd for Chip. - Other minor changes. V7->V8: - Several updates to cargo.toml files, like license, version, etc. - Removed Sync support for chip and gpiosim. - Implemented, in a separate patch, iterator support for Events. - Fixed missing SAFETY comments. - Fixed build for 32 bit systems. - Use errno::Errno. - Removed Clone derive for many structures, that store raw pointers. - line setting helpers return the object back, so another helper can be called directly on them. Also made all helpers public and used the same in tests and example for single configurations. - Enums for gpiosim constants. - New examples to demonstrate parallelism and event handling. - Separated out HTE tests and marked as #[ignore] now. - Updated commit subjects. - Other minor changes. V6->V7: - Don't let buffer read new events if the earlier events are still referenced. - BufferIntenal is gone now, to make the above work. - Update example and tests too for the same. V5->V6: - Updates according to the new line-settings interface. - New file, line_settings.rs. - Renamed 'enum Setting' as 'SettingVal' to avoid conflicting names, as we also have 'struct Settings' now. - Support for HTE clock type. - Implement 'Eq' for public structure/enums (reported by build). - Remove 'SettingKindMap' and 'SettingMap' as they aren't required anymore. - Updated tests based on new interface. V4->V5: - Arrange as workspace with crates for libgpiod-sys, libgpiod, gpiosim. - Use static libgpiod and libgpiosim libraries instead of rebuilding again. - Arrange in modules instead of flattened approach. - New enums like Setting and SettingKind and new types based on them SettingMap and SettingKindMap. - New property independent helpers for line_config, like set_prop_default(). - Improved tests/examples, new example for gpiowatch. - Add pre-built bindings for gpiosim too. - Many other changes. V3->V4: - Rebased on top of new changes, and made changes accordingly. - Added rust integration tests with gpiosim. - Found a kernel bug with tests, sent a patch for that to LKML. V2->V3: - Remove naming redundancy, users just need to do this now use libgpiod:{Chip, Direction, LineConfig} now (Bartosz); - Fix lifetime issues between event-buffer and edge-event modules, the event buffer is released after the last edge-event reference is dropped (Bartosz). - Allow edge-event to be copied, and freed later (Bartosz). - Add two separate rust crates, sys and wrapper (Gerard). - Null-terminate the strings passed to libgpiod (Wedson). - Drop unnecessary checks to validate string returned from chip:name/label/path. - Fix SAFETY comments (Wedson). - Drop unnecessary clone() instances (Bartosz). V1->V2: - Added examples (I tested everything except gpiomon.rs, didn't have right hardware/mock device to test). - Build rust bindings as part of Make, update documentation. Thanks. -- Viresh Viresh Kumar (8): bindings: rust: Add libgpiod-sys rust crate bindings: rust: Add pre generated bindings for libgpiod-sys bindings: rust: Add gpiosim crate bindings: rust: Add pre generated bindings for gpiosim bindings: rust: Add libgpiod crate bindings: rust: Add examples to libgpiod crate bindings: rust: Add tests for libgpiod crate bindings: rust: Integrate building of bindings with make .gitignore | 5 + README | 8 +- TODO | 8 - bindings/Makefile.am | 6 + bindings/rust/Cargo.toml | 7 + bindings/rust/Makefile.am | 18 + bindings/rust/gpiosim/Cargo.toml | 22 + bindings/rust/gpiosim/README.md | 11 + bindings/rust/gpiosim/build.rs | 43 + bindings/rust/gpiosim/src/bindings.rs | 180 +++ bindings/rust/gpiosim/src/lib.rs | 79 ++ bindings/rust/gpiosim/src/sim.rs | 331 +++++ bindings/rust/libgpiod-sys/Cargo.toml | 20 + bindings/rust/libgpiod-sys/README.md | 11 + bindings/rust/libgpiod-sys/build.rs | 41 + bindings/rust/libgpiod-sys/src/bindings.rs | 1173 +++++++++++++++++ bindings/rust/libgpiod-sys/src/lib.rs | 13 + bindings/rust/libgpiod/Cargo.toml | 21 + .../rust/libgpiod/examples/gpio_events.rs | 89 ++ .../examples/gpio_threaded_info_events.rs | 133 ++ bindings/rust/libgpiod/examples/gpiodetect.rs | 31 + bindings/rust/libgpiod/examples/gpiofind.rs | 37 + bindings/rust/libgpiod/examples/gpioget.rs | 46 + bindings/rust/libgpiod/examples/gpioinfo.rs | 98 ++ bindings/rust/libgpiod/examples/gpiomon.rs | 75 ++ bindings/rust/libgpiod/examples/gpioset.rs | 64 + bindings/rust/libgpiod/examples/gpiowatch.rs | 54 + bindings/rust/libgpiod/src/chip.rs | 310 +++++ bindings/rust/libgpiod/src/edge_event.rs | 93 ++ bindings/rust/libgpiod/src/event_buffer.rs | 167 +++ bindings/rust/libgpiod/src/info_event.rs | 69 + bindings/rust/libgpiod/src/lib.rs | 479 +++++++ bindings/rust/libgpiod/src/line_config.rs | 135 ++ bindings/rust/libgpiod/src/line_info.rs | 162 +++ bindings/rust/libgpiod/src/line_request.rs | 227 ++++ bindings/rust/libgpiod/src/line_settings.rs | 297 +++++ bindings/rust/libgpiod/src/request_config.rs | 95 ++ bindings/rust/libgpiod/tests/chip.rs | 98 ++ bindings/rust/libgpiod/tests/common/config.rs | 143 ++ bindings/rust/libgpiod/tests/common/mod.rs | 10 + bindings/rust/libgpiod/tests/edge_event.rs | 298 +++++ bindings/rust/libgpiod/tests/info_event.rs | 167 +++ bindings/rust/libgpiod/tests/line_config.rs | 96 ++ bindings/rust/libgpiod/tests/line_info.rs | 276 ++++ bindings/rust/libgpiod/tests/line_request.rs | 510 +++++++ bindings/rust/libgpiod/tests/line_settings.rs | 204 +++ .../rust/libgpiod/tests/request_config.rs | 39 + configure.ac | 16 + 48 files changed, 6504 insertions(+), 11 deletions(-) create mode 100644 bindings/rust/Cargo.toml create mode 100644 bindings/rust/Makefile.am create mode 100644 bindings/rust/gpiosim/Cargo.toml create mode 100644 bindings/rust/gpiosim/README.md create mode 100644 bindings/rust/gpiosim/build.rs create mode 100644 bindings/rust/gpiosim/src/bindings.rs create mode 100644 bindings/rust/gpiosim/src/lib.rs create mode 100644 bindings/rust/gpiosim/src/sim.rs create mode 100644 bindings/rust/libgpiod-sys/Cargo.toml create mode 100644 bindings/rust/libgpiod-sys/README.md create mode 100644 bindings/rust/libgpiod-sys/build.rs create mode 100644 bindings/rust/libgpiod-sys/src/bindings.rs create mode 100644 bindings/rust/libgpiod-sys/src/lib.rs create mode 100644 bindings/rust/libgpiod/Cargo.toml create mode 100644 bindings/rust/libgpiod/examples/gpio_events.rs create mode 100644 bindings/rust/libgpiod/examples/gpio_threaded_info_events.rs create mode 100644 bindings/rust/libgpiod/examples/gpiodetect.rs create mode 100644 bindings/rust/libgpiod/examples/gpiofind.rs create mode 100644 bindings/rust/libgpiod/examples/gpioget.rs create mode 100644 bindings/rust/libgpiod/examples/gpioinfo.rs create mode 100644 bindings/rust/libgpiod/examples/gpiomon.rs create mode 100644 bindings/rust/libgpiod/examples/gpioset.rs create mode 100644 bindings/rust/libgpiod/examples/gpiowatch.rs create mode 100644 bindings/rust/libgpiod/src/chip.rs create mode 100644 bindings/rust/libgpiod/src/edge_event.rs create mode 100644 bindings/rust/libgpiod/src/event_buffer.rs create mode 100644 bindings/rust/libgpiod/src/info_event.rs create mode 100644 bindings/rust/libgpiod/src/lib.rs create mode 100644 bindings/rust/libgpiod/src/line_config.rs create mode 100644 bindings/rust/libgpiod/src/line_info.rs create mode 100644 bindings/rust/libgpiod/src/line_request.rs create mode 100644 bindings/rust/libgpiod/src/line_settings.rs create mode 100644 bindings/rust/libgpiod/src/request_config.rs create mode 100644 bindings/rust/libgpiod/tests/chip.rs create mode 100644 bindings/rust/libgpiod/tests/common/config.rs create mode 100644 bindings/rust/libgpiod/tests/common/mod.rs create mode 100644 bindings/rust/libgpiod/tests/edge_event.rs create mode 100644 bindings/rust/libgpiod/tests/info_event.rs create mode 100644 bindings/rust/libgpiod/tests/line_config.rs create mode 100644 bindings/rust/libgpiod/tests/line_info.rs create mode 100644 bindings/rust/libgpiod/tests/line_request.rs create mode 100644 bindings/rust/libgpiod/tests/line_settings.rs create mode 100644 bindings/rust/libgpiod/tests/request_config.rs -- 2.31.1.272.g89b43f80a514

2 years, 1 month

7
48
0 0

Last regular call tomorrow

by Alex Bennée

Hi, Tomorrow will be the last regular Stratos call as we soft shutdown the project. We will continue VirtIO work within other Linaro projects and I intend to keep the project calendar active for further open meetings associated with VirtIO. There is one piece of VirtIO development to discuss (the virtio-loopback by OVS) and then I would like to thank everyone who has contributed over the last few years. See you tomorrow. -- Alex Bennée

2 years, 1 month

1
0
0 0

Dearest / Liebste,

by AISHA GADDAFI

Dear Friend, In the name of of Allah the Merciful Peace be upon you and God's mercy and blessings be upon you I am sending this message to you from Oman, In the city of Muscat. Aisha Gaddafi is my name, I am presently living in Oman,i am a Widow and single Mother with three Children, the only biological Daughter of late Libyan President (Late Colonel Muammar Gaddafi) and presently I am under political asylum protection by the Omani Government. I have funds worth $27.500.000.00 US Dollars "Twenty Seven Million Five Hundred Thousand United State Dollars" which I want to entrust to you for investment project assistance in your country.. Kindly reply urgently for more details. My email address below: mrsaishagadafi1976(a)gmail.com Thanks Yours Truly Aisha ------- DEUTSCHE SPRACHE ---------- Lieber Freund, Ich sende Ihnen diese Nachricht aus dem Oman, in der Stadt Muscat. Aisha Gaddafi ist mein Name, ich lebe derzeit im Oman, ich bin Witwe und alleinerziehende Mutter mit drei Kindern, die einzige leibliche Tochter des verstorbenen libyschen Präsidenten (dem verstorbenen Oberst Muammar Gaddafi) und stehe derzeit unter politischem Asylschutz der omanischen Regierung . Ich habe Gelder im Wert von 27.500.000,00 US-Dollar "Twenty Seven Million Five Hundred Thousand United State Dollars", die ich Ihnen für die Unterstützung von Investitionsprojekten in Ihrem Land anvertrauen möchte. Bitte antworten Sie dringend für weitere Details. meine E-Mail-Adresse unten: mrsaishagadafi1976(a)gmail.com Vielen Dank Mit freundlichen Grüßen Aisha

2 years, 1 month

1
0
0 0

[libgpiod v2][PATCH V8 0/9] bindings: rust: Add libgpiod-sys rust crate

by Viresh Kumar

Hello, Here is another version of the rust bindings, based of the master branch. Pushed here: https://github.com/vireshk/libgpiod v8 V7->V8: - Several updates to cargo.toml files, like license, version, etc. - Removed Sync support for chip and gpiosim. - Implemented, in a separate patch, iterator support for Events. - Fixed missing SAFETY comments. - Fixed build for 32 bit systems. - Use errno::Errno. - Removed Clone derive for many structures, that store raw pointers. - line setting helpers return the object back, so another helper can be called directly on them. Also made all helpers public and used the same in tests and example for single configurations. - Enums for gpiosim constants. - New examples to demonstrate parallelism and event handling. - Separated out HTE tests and marked as #[ignore] now. - Updated commit subjects. - Other minor changes. V6->V7: - Don't let buffer read new events if the earlier events are still referenced. - BufferIntenal is gone now, to make the above work. - Update example and tests too for the same. V5->V6: - Updates according to the new line-settings interface. - New file, line_settings.rs. - Renamed 'enum Setting' as 'SettingVal' to avoid conflicting names, as we also have 'struct Settings' now. - Support for HTE clock type. - Implement 'Eq' for public structure/enums (reported by build). - Remove 'SettingKindMap' and 'SettingMap' as they aren't required anymore. - Updated tests based on new interface. V4->V5: - Arrange as workspace with crates for libgpiod-sys, libgpiod, gpiosim. - Use static libgpiod and libgpiosim libraries instead of rebuilding again. - Arrange in modules instead of flattened approach. - New enums like Setting and SettingKind and new types based on them SettingMap and SettingKindMap. - New property independent helpers for line_config, like set_prop_default(). - Improved tests/examples, new example for gpiowatch. - Add pre-built bindings for gpiosim too. - Many other changes. V3->V4: - Rebased on top of new changes, and made changes accordingly. - Added rust integration tests with gpiosim. - Found a kernel bug with tests, sent a patch for that to LKML. V2->V3: - Remove naming redundancy, users just need to do this now use libgpiod:{Chip, Direction, LineConfig} now (Bartosz); - Fix lifetime issues between event-buffer and edge-event modules, the event buffer is released after the last edge-event reference is dropped (Bartosz). - Allow edge-event to be copied, and freed later (Bartosz). - Add two separate rust crates, sys and wrapper (Gerard). - Null-terminate the strings passed to libgpiod (Wedson). - Drop unnecessary checks to validate string returned from chip:name/label/path. - Fix SAFETY comments (Wedson). - Drop unnecessary clone() instances (Bartosz). V1->V2: - Added examples (I tested everything except gpiomon.rs, didn't have right hardware/mock device to test). - Build rust bindings as part of Make, update documentation. Thanks. -- Viresh Viresh Kumar (9): bindings: rust: Add libgpiod-sys rust crate bindings: rust: Add pre generated bindings for libgpiod-sys bindings: rust: Add gpiosim crate bindings: rust: Add pre generated bindings for gpiosim bindings: rust: Add libgpiod crate bindings: rust: Add examples to libgpiod crate bindings: rust: Add tests for libgpiod crate bindings: rust: Integrate building of bindings with make bindings: rust: Implement iterator for edge events .gitignore | 5 + README | 8 +- TODO | 8 - bindings/Makefile.am | 6 + bindings/rust/Cargo.toml | 7 + bindings/rust/Makefile.am | 18 + bindings/rust/gpiosim/Cargo.toml | 24 + bindings/rust/gpiosim/README.md | 11 + bindings/rust/gpiosim/build.rs | 43 + bindings/rust/gpiosim/src/bindings.rs | 180 +++ bindings/rust/gpiosim/src/lib.rs | 79 ++ bindings/rust/gpiosim/src/sim.rs | 331 +++++ bindings/rust/libgpiod-sys/Cargo.toml | 22 + bindings/rust/libgpiod-sys/README.md | 11 + bindings/rust/libgpiod-sys/build.rs | 41 + bindings/rust/libgpiod-sys/src/bindings.rs | 1173 +++++++++++++++++ bindings/rust/libgpiod-sys/src/lib.rs | 13 + bindings/rust/libgpiod/Cargo.toml | 23 + .../rust/libgpiod/examples/gpio_events.rs | 89 ++ .../examples/gpio_threaded_info_events.rs | 133 ++ bindings/rust/libgpiod/examples/gpiodetect.rs | 31 + bindings/rust/libgpiod/examples/gpiofind.rs | 37 + bindings/rust/libgpiod/examples/gpioget.rs | 46 + bindings/rust/libgpiod/examples/gpioinfo.rs | 98 ++ bindings/rust/libgpiod/examples/gpiomon.rs | 74 ++ bindings/rust/libgpiod/examples/gpioset.rs | 64 + bindings/rust/libgpiod/examples/gpiowatch.rs | 54 + bindings/rust/libgpiod/src/chip.rs | 317 +++++ bindings/rust/libgpiod/src/edge_event.rs | 110 ++ bindings/rust/libgpiod/src/event_buffer.rs | 179 +++ bindings/rust/libgpiod/src/info_event.rs | 69 + bindings/rust/libgpiod/src/lib.rs | 480 +++++++ bindings/rust/libgpiod/src/line_config.rs | 135 ++ bindings/rust/libgpiod/src/line_info.rs | 162 +++ bindings/rust/libgpiod/src/line_request.rs | 227 ++++ bindings/rust/libgpiod/src/line_settings.rs | 297 +++++ bindings/rust/libgpiod/src/request_config.rs | 95 ++ bindings/rust/libgpiod/tests/chip.rs | 99 ++ bindings/rust/libgpiod/tests/common/config.rs | 143 ++ bindings/rust/libgpiod/tests/common/mod.rs | 10 + bindings/rust/libgpiod/tests/edge_event.rs | 299 +++++ bindings/rust/libgpiod/tests/info_event.rs | 167 +++ bindings/rust/libgpiod/tests/line_config.rs | 96 ++ bindings/rust/libgpiod/tests/line_info.rs | 276 ++++ bindings/rust/libgpiod/tests/line_request.rs | 510 +++++++ bindings/rust/libgpiod/tests/line_settings.rs | 204 +++ .../rust/libgpiod/tests/request_config.rs | 39 + configure.ac | 16 + 48 files changed, 6548 insertions(+), 11 deletions(-) create mode 100644 bindings/rust/Cargo.toml create mode 100644 bindings/rust/Makefile.am create mode 100644 bindings/rust/gpiosim/Cargo.toml create mode 100644 bindings/rust/gpiosim/README.md create mode 100644 bindings/rust/gpiosim/build.rs create mode 100644 bindings/rust/gpiosim/src/bindings.rs create mode 100644 bindings/rust/gpiosim/src/lib.rs create mode 100644 bindings/rust/gpiosim/src/sim.rs create mode 100644 bindings/rust/libgpiod-sys/Cargo.toml create mode 100644 bindings/rust/libgpiod-sys/README.md create mode 100644 bindings/rust/libgpiod-sys/build.rs create mode 100644 bindings/rust/libgpiod-sys/src/bindings.rs create mode 100644 bindings/rust/libgpiod-sys/src/lib.rs create mode 100644 bindings/rust/libgpiod/Cargo.toml create mode 100644 bindings/rust/libgpiod/examples/gpio_events.rs create mode 100644 bindings/rust/libgpiod/examples/gpio_threaded_info_events.rs create mode 100644 bindings/rust/libgpiod/examples/gpiodetect.rs create mode 100644 bindings/rust/libgpiod/examples/gpiofind.rs create mode 100644 bindings/rust/libgpiod/examples/gpioget.rs create mode 100644 bindings/rust/libgpiod/examples/gpioinfo.rs create mode 100644 bindings/rust/libgpiod/examples/gpiomon.rs create mode 100644 bindings/rust/libgpiod/examples/gpioset.rs create mode 100644 bindings/rust/libgpiod/examples/gpiowatch.rs create mode 100644 bindings/rust/libgpiod/src/chip.rs create mode 100644 bindings/rust/libgpiod/src/edge_event.rs create mode 100644 bindings/rust/libgpiod/src/event_buffer.rs create mode 100644 bindings/rust/libgpiod/src/info_event.rs create mode 100644 bindings/rust/libgpiod/src/lib.rs create mode 100644 bindings/rust/libgpiod/src/line_config.rs create mode 100644 bindings/rust/libgpiod/src/line_info.rs create mode 100644 bindings/rust/libgpiod/src/line_request.rs create mode 100644 bindings/rust/libgpiod/src/line_settings.rs create mode 100644 bindings/rust/libgpiod/src/request_config.rs create mode 100644 bindings/rust/libgpiod/tests/chip.rs create mode 100644 bindings/rust/libgpiod/tests/common/config.rs create mode 100644 bindings/rust/libgpiod/tests/common/mod.rs create mode 100644 bindings/rust/libgpiod/tests/edge_event.rs create mode 100644 bindings/rust/libgpiod/tests/info_event.rs create mode 100644 bindings/rust/libgpiod/tests/line_config.rs create mode 100644 bindings/rust/libgpiod/tests/line_info.rs create mode 100644 bindings/rust/libgpiod/tests/line_request.rs create mode 100644 bindings/rust/libgpiod/tests/line_settings.rs create mode 100644 bindings/rust/libgpiod/tests/request_config.rs -- 2.31.1.272.g89b43f80a514

2 years, 1 month

2
18
0 0

Re: [virtio-dev] [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.

by Arnd Bergmann

() b On Thu, Aug 25, 2022 at 3:44 PM Harald Mommer <harald.mommer(a)opensynergy.com> wrote: > > - CAN Control > > - "ip link set up can0" starts the virtual CAN controller, > - "ip link set up can0" stops the virtual CAN controller > > - CAN RX > > Receive CAN frames. CAN frames can be standard or extended, classic or > CAN FD. Classic CAN RTR frames are supported. > > - CAN TX > > Send CAN frames. CAN frames can be standard or extended, classic or > CAN FD. Classic CAN RTR frames are supported. > > - CAN Event indication (BusOff) > > The bus off handling is considered code complete but until now bus off > handling is largely untested. > > Signed-off-by: Harald Mommer <hmo(a)opensynergy.com> This looks nice overall, but as you say there is still some work needed in all the details. I've done a rough first pass at reviewing it, but I have no specific understanding of CAN, so these are mostly generic comments about coding style or network drivers. > drivers/net/can/Kconfig | 1 + > drivers/net/can/Makefile | 1 + > drivers/net/can/virtio_can/Kconfig | 12 + > drivers/net/can/virtio_can/Makefile | 5 + > drivers/net/can/virtio_can/virtio_can.c | 1176 +++++++++++++++++++++++ > include/uapi/linux/virtio_can.h | 69 ++ Since the driver is just one file, you probably don't need the subdirectory. > +struct virtio_can_tx { > + struct list_head list; > + int prio; /* Currently always 0 "normal priority" */ > + int putidx; > + struct virtio_can_tx_out tx_out; > + struct virtio_can_tx_in tx_in; > +}; Having a linked list of these appears to add a little extra complexity. If they are always processed in sequence, using an array would be much simpler, as you just need to remember the index. > +#ifdef DEBUG > +static void __attribute__((unused)) > +virtio_can_hexdump(const void *data, size_t length, size_t base) > +{ > +#define VIRTIO_CAN_MAX_BYTES_PER_LINE 16u This seems to duplicate print_hex_dump(), maybe just use that? > + > + while (!virtqueue_get_buf(vq, &len) && !virtqueue_is_broken(vq)) > + cpu_relax(); > + > + mutex_unlock(&priv->ctrl_lock); A busy loop is probably not what you want here. Maybe just wait_for_completion() until the callback happens? > + /* Push loopback echo. Will be looped back on TX interrupt/TX NAPI */ > + can_put_echo_skb(skb, dev, can_tx_msg->putidx, 0); > + > + err = virtqueue_add_sgs(vq, sgs, 1u, 1u, can_tx_msg, GFP_ATOMIC); > + if (err != 0) { > + list_del(&can_tx_msg->list); > + virtio_can_free_tx_idx(priv, can_tx_msg->prio, > + can_tx_msg->putidx); > + netif_stop_queue(dev); > + spin_unlock_irqrestore(&priv->tx_lock, flags); > + kfree(can_tx_msg); > + if (err == -ENOSPC) > + netdev_info(dev, "TX: Stop queue, no space left\n"); > + else > + netdev_warn(dev, "TX: Stop queue, reason = %d\n", err); > + return NETDEV_TX_BUSY; > + } > + > + if (!virtqueue_kick(vq)) > + netdev_err(dev, "%s(): Kick failed\n", __func__); > + > + spin_unlock_irqrestore(&priv->tx_lock, flags); There should not be a need for a spinlock or disabling interrupts in the xmit function. What exactly are you protecting against here? As a further optimization, you may want to use the xmit_more() function, as the virtqueue kick is fairly expensive and can be batched here. > + kfree(can_tx_msg); > + > + /* Flow control */ > + if (netif_queue_stopped(dev)) { > + netdev_info(dev, "TX ACK: Wake up stopped queue\n"); > + netif_wake_queue(dev); > + } You may want to add netdev_sent_queue()/netdev_completed_queue() based BQL flow control here as well, so you don't have to rely on the queue filling up completely. > +static int virtio_can_probe(struct virtio_device *vdev) > +{ > + struct net_device *dev; > + struct virtio_can_priv *priv; > + int err; > + unsigned int echo_skb_max; > + unsigned int idx; > + u16 lo_tx = VIRTIO_CAN_ECHO_SKB_MAX; > + > + BUG_ON(!vdev); Not a useful debug check, just remove the BUG_ON(!vdev), here and elsewhere > + > + echo_skb_max = lo_tx; > + dev = alloc_candev(sizeof(struct virtio_can_priv), echo_skb_max); > + if (!dev) > + return -ENOMEM; > + > + priv = netdev_priv(dev); > + > + dev_info(&vdev->dev, "echo_skb_max = %u\n", priv->can.echo_skb_max); Also remove the prints, I assume this is left over from initial debugging. > + priv->can.do_set_mode = virtio_can_set_mode; > + priv->can.state = CAN_STATE_STOPPED; > + /* Set Virtio CAN supported operations */ > + priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING; > + if (virtio_has_feature(vdev, VIRTIO_CAN_F_CAN_FD)) { > + dev_info(&vdev->dev, "CAN FD is supported\n"); > + } else { > + dev_info(&vdev->dev, "CAN FD not supported\n"); > + } Same here. There should be a way to see CAN FD support as an interactive user, but there is no point printing it to the console. > + > + register_virtio_can_dev(dev); > + > + /* Initialize virtqueues */ > + err = virtio_can_find_vqs(priv); > + if (err != 0) > + goto on_failure; Should the register_virtio_can_dev() be done here? I would expect this to be the last thing after setting up the queues. > +static struct virtio_driver virtio_can_driver = { > + .feature_table = features, > + .feature_table_size = ARRAY_SIZE(features), > + .feature_table_legacy = NULL, > + .feature_table_size_legacy = 0u, > + .driver.name = KBUILD_MODNAME, > + .driver.owner = THIS_MODULE, > + .id_table = virtio_can_id_table, > + .validate = virtio_can_validate, > + .probe = virtio_can_probe, > + .remove = virtio_can_remove, > + .config_changed = NULL, > +#ifdef CONFIG_PM_SLEEP > + .freeze = virtio_can_freeze, > + .restore = virtio_can_restore, > +#endif You can remove the #ifdef here and above, and replace that with the pm_sleep_ptr() macro in the assignment. > diff --git a/include/uapi/linux/virtio_can.h b/include/uapi/linux/virtio_can.h > new file mode 100644 > index 000000000000..0ca75c7a98ee > --- /dev/null > +++ b/include/uapi/linux/virtio_can.h > @@ -0,0 +1,69 @@ > +/* SPDX-License-Identifier: BSD-3-Clause */ > +/* > + * Copyright (C) 2021 OpenSynergy GmbH > + */ > +#ifndef _LINUX_VIRTIO_VIRTIO_CAN_H > +#define _LINUX_VIRTIO_VIRTIO_CAN_H > + > +#include <linux/types.h> > +#include <linux/virtio_types.h> > +#include <linux/virtio_ids.h> > +#include <linux/virtio_config.h> Maybe a link to the specification here? I assume the definitions in this file are all lifted from that document, rather than specific to the driver, right? Arnd

2 years, 2 months

3
3
0 0

Re: [virtio-dev] Re: [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.

by Arnd Bergmann

On Fri, Nov 4, 2022, at 16:32, Jan Kiszka wrote: > On 03.11.22 14:55, Harald Mommer wrote: >> >> On 27.08.22 11:39, Marc Kleine-Budde wrote: >>> Is there an Open Source implementation of the host side of this >>> interface? >> there is neither an open source device nor is it currently planned. The >> device I'm developing is closed source. > > Likely not helpful long-term /wrt kernel QA - how should kernelci or > others even have a chance to test the driver? Keep in mind that you are > not proposing a specific driver for an Opensynergy hypervisor, rather > for the open and vendor-agnostic virtio spec. > > But QEMU already supports both CAN and virtio, thus should be relatively > easy to augment with this new device. Agreed, either hooking into the qemu support, or having a separate vhost-user backend that forwards data to the host stack would be helpful here, in particular to see how the flow control works. IIRC when we discussed virtio-can on the stratos list, one of the issues that was pointed out was filtering of frames for specific CAN IDs in the host socketcan for assigning individual IDs to separate guests. It would be good to understand whether a generic host implementation has the same problems, and what can be done in socketcan to help with that. Arnd

2 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

Stratos-dev November 2022