[Asa-dev] [CI] SBSA ACS tests

[Marcin Juszkiewicz]

W dniu 30.10.2020 o 13:07, Marcin Juszkiewicz via Asa-dev pisze:

> Current situation summary:
> 
> SBSA level | tests run | passed | failed
> ----------------------------------------
>      3      |     45    |   32   |    6
>      4      |     87    |   44   |   13
>      5      |     92    |   44   |   20
>      6      |    102    |   44   |   29

As you see SBSA level 3 is near with just 6 failed tests:


   12 : Check number of PMU counters
        Failed on PE -    0 for Level=  3 : Result:  --FAIL-- 1

  102 : If PCIe, then GIC implements ITS
        Failed on PE -    0 for Level=  3 : Result:  --FAIL-- 1

  104 : GIC Maintenance Interrupt
        Failed on PE -    0 for Level=  3 : Result:  --FAIL-- 1

  206 : SYS Timer if PE Timer not ON
        PE Timers are not always-on.
        Failed on PE -    0 for Level=  3 : Result:  --FAIL-- 1

  301 : Check NS Watchdog Accessibility
        No Watchdogs reported          0
        Failed on PE -    0 for Level=  3 : Result:  --FAIL-- 1

  302 : Check Watchdog WS0 interrupt
        No Watchdogs reported          0
        Failed on PE -    0 for Level=  3 : Result:  --FAIL-- 1


Cards for failed tests:

test  12     is ASA-65 (add PMU counters)
test 102     is ASA-66 (add ITS support)
test 104     is ASA-70 (add GIC Maintenance Interrupt)
test 206     is ASA-71 (fix always-on timers)
test 301/302 is ASA-57 (add Watchdog support)

 From them ASA-57 is done in QEMU, approved for EDK2.

If you have comments/ideas etc then please comment in Jira cards or in 
replies.