{% extends 'stm32mp157c-dk2.jinja2' %}
{% set console_device = 'ttyACM0' %}
{% set device_info = [{'board_id': '1900d00f3b1400a2'}] %}
{% set power_off_command = '/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command off --port 23' %}
{# We use the ethernet controlled relay to emulate the power button press #}
{% set hard_reset_command = '/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command reboot --port 23 --delay 20' %}
{% set connection_list = ['uart0'] %}
{% set connection_commands = {'uart0': 'telnet staging01 7111'} %}
{% set connection_tags = {'uart0': ['primary', 'telnet']} %}
{% set power_on_command = '/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command on --port 23' %}
{% set flasher_deploy_commands = ['/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command off --port 23',
'/usr/local/lab-scripts/eth008_control -a 192.168.1.205 -r 1 -s on',
'/usr/local/lab-scripts/eth008_control -a 192.168.1.205 -r 2 -s on',
'/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command on --port 23',
'pwd',
'tree',
'cat {LAYOUT}',
'tar xvf {TARBALL}',
'/usr/local/bin/STM32_Programmer_CLI -c port=usb1 -w {LAYOUT} -q',
'/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command off --port 23',
'/usr/local/lab-scripts/eth008_control -a 192.168.1.205 -r 1 -s off',
'/usr/local/lab-scripts/eth008_control -a 192.168.1.205 -r 2 -s off',
'/usr/local/lab-scripts/snmp_pdu_control --hostname pdu18 --command on --port 23'] %}