[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd070]
[    0.000000] Linux version 5.7.0-0.bpo.2-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6), GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.7.10-1~bpo10+1 (2020-07-30)
[    0.000000] efi: EFI v2.70 by EDK II
[    0.000000] efi:  ACPI 2.0=0x100fc100000  MEMATTR=0x100fe86fa98  MEMRESERVE=0x100fbdc0d18 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] cma: Reserved 64 MiB at 0x00000100f7800000
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000100FC100000 000024 (v02 LINARO)
[    0.000000] ACPI: XSDT 0x00000100FC0F0000 00006C (v01 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: FACP 0x00000100FC0D0000 000114 (v06 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: DSDT 0x00000100FC090000 000C40 (v01 LINARO SBSAQEMU 20200810 INTL 20190509)
[    0.000000] ACPI: DBG2 0x00000100FC0E0000 00005C (v00 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: GTDT 0x00000100FC0C0000 000060 (v02 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: MCFG 0x00000100FC0B0000 00004C (v01 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: SPCR 0x00000100FC0A0000 000050 (v02 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: APIC 0x00000100FC070000 0000A4 (v04 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: SSDT 0x00000100FC050000 00004B (v02 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: PPTT 0x00000100FC030000 00009C (v02 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: BGRT 0x00000100FC020000 000038 (v01 LINARO SBSAQEMU 20200810 LNRO 00000001)
[    0.000000] ACPI: SPCR: console: pl011,mmio32,0x60000000,115200
[    0.000000] ACPI: NUMA: Failed to initialise from firmware
[    0.000000] NUMA: Faking a node at [mem 0x0000010000000000-0x00000100ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x100ff4180c0-0x100ff419fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000010000000000-0x000001003fffffff]
[    0.000000]   DMA32    [mem 0x0000010040000000-0x00000100ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000010000000000-0x00000100fbe8ffff]
[    0.000000]   node   0: [mem 0x00000100fbe90000-0x00000100fbffffff]
[    0.000000]   node   0: [mem 0x00000100fc000000-0x00000100ff5dffff]
[    0.000000]   node   0: [mem 0x00000100ff5e0000-0x00000100ff9bffff]
[    0.000000]   node   0: [mem 0x00000100ff9c0000-0x00000100ffffffff]
[    0.000000] Zeroed struct page in unavailable ranges: 400 pages
[    0.000000] Initmem setup node 0 [mem 0x0000010000000000-0x00000100ffffffff]
[    0.000000] On node 0 totalpages: 1048576
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 262144 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 786432 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from ACPI.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] ACPI: SRAT not present
[    0.000000] percpu: Embedded 32 pages/cpu s93720 r8192 d29160 u131072
[    0.000000] pcpu-alloc: s93720 r8192 d29160 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 832075
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 834220
[    0.000000] CPU features: detected: EL2 vector hardening
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] CPU features: detected: ARM erratum 1319367
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-arm64 root=UUID=eaaaa9ac-370e-4c1f-8de5-5ab9acd5002a ro quiet
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x1003bfff000-0x1003ffff000] (64MB)
[    0.000000] Memory: 2009492K/4194304K available (10684K kernel code, 1848K rwdata, 3792K rodata, 5184K init, 561K bss, 201488K reserved, 65536K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x4c/0x5d0 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 36833 entries in 144 pages
[    0.000000] ftrace: allocated 144 pages with 2 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 224 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000040080000
[    0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[    0.000123] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
[    0.005452] Console: colour dummy device 80x25
[    0.006589] ACPI: Core revision 20200326
[    0.009629] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000)
[    0.009729] pid_max: default: 32768 minimum: 301
[    0.010630] LSM: Security Framework initializing
[    0.011205] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013493] AppArmor: AppArmor initialized
[    0.013552] TOMOYO Linux initialized
[    0.014342] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.014382] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.043496] rcu: Hierarchical SRCU implementation.
[    0.048001] Remapping and enabling EFI services.
[    0.051372] smp: Bringing up secondary CPUs ...
[    0.051451] smp: Brought up 1 node, 1 CPU
[    0.051465] SMP: Total of 1 processors activated.
[    0.051544] CPU features: detected: 32-bit EL0 Support
[    0.051582] CPU features: detected: CRC32 instructions
[    0.072623] CPU: All CPU(s) started at EL2
[    0.072986] alternatives: patching kernel code
[    0.200339] node 0 initialised, 479447 pages in 124ms
[    0.213447] devtmpfs: initialized
[    0.221327] Registered cp15_barrier emulation handler
[    0.221366] Registered setend emulation handler
[    0.221462] KASLR disabled due to lack of seed
[    0.224182] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.224287] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.229621] pinctrl core: initialized pinctrl subsystem
[    0.235750] thermal_sys: Registered thermal governor 'fair_share'
[    0.235816] thermal_sys: Registered thermal governor 'step_wise'
[    0.236211] DMI not present or invalid.
[    0.241610] NET: Registered protocol family 16
[    0.248750] DMA: preallocated 256 KiB pool for atomic allocations
[    0.248832] audit: initializing netlink subsys (disabled)
[    0.252947] cpuidle: using governor ladder
[    0.253042] cpuidle: using governor menu
[    0.253912] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1
[    0.254412] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.254686] ASID allocator initialised with 65536 entries
[    0.255529] ACPI: bus type PCI registered
[    0.255642] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.256290] Serial: AMBA PL011 UART driver
[    0.270137] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.270156] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.270160] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.270165] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.686164] ACPI: Added _OSI(Module Device)
[    0.686186] ACPI: Added _OSI(Processor Device)
[    0.686191] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.686195] ACPI: Added _OSI(Processor Aggregator Device)
[    0.686253] ACPI: Added _OSI(Linux-Dell-Video)
[    0.686259] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.686264] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.696067] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.701344] ACPI: Interpreter enabled
[    0.701361] ACPI: Using GIC for interrupt routing
[    0.701730] ACPI: MCFG table detected, 2 entries
[    0.718374] ARMH0011:00: ttyAMA0 at MMIO 0x60000000 (irq = 5, base_baud = 0) is a SBSA
[    0.719219] printk: console [ttyAMA0] enabled
[    0.725832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.726278] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.730030] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.730884] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.731919] acpi PNP0A08:00: ECAM area [mem 0xf0000000-0xffffffff] reserved by PNP0C02:00
[    0.732077] acpi PNP0A08:00: ECAM at [mem 0xf0000000-0xffffffff] for [bus 00-ff]
[    0.732699] Remapped I/O 0x000000007fff0000 to [io  0x0000-0xffff window]
[    0.734324] PCI host bridge to bus 0000:00
[    0.734455] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff window]
[    0.734476] pci_bus 0000:00: root bus resource [mem 0x100000000-0xffffffffff window]
[    0.734483] pci_bus 0000:00: root bus resource [io  0x0000-0xffff window]
[    0.734573] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.735506] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    0.738800] pci 0000:00:01.0: [8086:10d3] type 00 class 0x020000
[    0.739074] pci 0000:00:01.0: reg 0x10: [mem 0x81060000-0x8107ffff]
[    0.739093] pci 0000:00:01.0: reg 0x14: [mem 0x81040000-0x8105ffff]
[    0.739125] pci 0000:00:01.0: reg 0x18: [io  0x0000-0x001f]
[    0.739133] pci 0000:00:01.0: reg 0x1c: [mem 0x81080000-0x81083fff]
[    0.739174] pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[    0.740075] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.740475] pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff pref]
[    0.741110] pci 0000:00:02.0: reg 0x18: [mem 0x81084000-0x81084fff]
[    0.742503] pci 0000:00:02.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.742676] pci 0000:00:02.0: BAR 0: assigned to efifb
[    0.743026] pci 0000:00:03.0: [1b36:000d] type 00 class 0x0c0330
[    0.743096] pci 0000:00:03.0: reg 0x10: [mem 0x100000000-0x100003fff 64bit]
[    0.744576] pci 0000:00:02.0: BAR 0: assigned [mem 0x80000000-0x80ffffff pref]
[    0.744730] pci 0000:00:01.0: BAR 6: assigned [mem 0x81000000-0x8103ffff pref]
[    0.744770] pci 0000:00:01.0: BAR 0: assigned [mem 0x81040000-0x8105ffff]
[    0.744784] pci 0000:00:01.0: BAR 1: assigned [mem 0x81060000-0x8107ffff]
[    0.744793] pci 0000:00:02.0: BAR 6: assigned [mem 0x81080000-0x8108ffff pref]
[    0.744799] pci 0000:00:01.0: BAR 3: assigned [mem 0x81090000-0x81093fff]
[    0.744878] pci 0000:00:03.0: BAR 0: assigned [mem 0x100000000-0x100003fff 64bit]
[    0.744928] pci 0000:00:02.0: BAR 2: assigned [mem 0x81094000-0x81094fff]
[    0.745128] pci 0000:00:01.0: BAR 2: assigned [io  0x1000-0x101f]
[    0.745367] pci_bus 0000:00: resource 4 [mem 0x80000000-0xefffffff window]
[    0.745379] pci_bus 0000:00: resource 5 [mem 0x100000000-0xffffffffff window]
[    0.745385] pci_bus 0000:00: resource 6 [io  0x0000-0xffff window]
[    0.746467] ACPI: PCI Interrupt Link [GSI0] (IRQs *35)
[    0.746675] ACPI: PCI Interrupt Link [GSI1] (IRQs *36)
[    0.746801] ACPI: PCI Interrupt Link [GSI2] (IRQs *37)
[    0.746907] ACPI: PCI Interrupt Link [GSI3] (IRQs *38)
[    0.748568] iommu: Default domain type: Translated 
[    0.749232] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.749321] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.749368] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.749389] vgaarb: loaded
[    0.750482] EDAC MC: Ver: 3.0.0
[    0.751926] Registered efivars operations
[    0.761443] NetLabel: Initializing
[    0.761460] NetLabel:  domain hash size = 128
[    0.761465] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.762348] NetLabel:  unlabeled traffic allowed by default
[    0.765322] clocksource: Switched to clocksource arch_sys_counter
[    0.826892] VFS: Disk quotas dquot_6.6.0
[    0.827045] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.830964] AppArmor: AppArmor Filesystem Enabled
[    0.831381] pnp: PnP ACPI init
[    0.833207] system 00:00: [mem 0xf0000000-0xffffffff window] could not be reserved
[    0.833368] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.833439] pnp: PnP ACPI: found 1 devices
[    0.847430] NET: Registered protocol family 2
[    0.852402] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.852504] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.852820] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.853295] TCP: Hash tables configured (established 32768 bind 32768)
[    0.854129] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.854338] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.857283] NET: Registered protocol family 1
[    0.857561] NET: Registered protocol family 44
[    0.858210] pci 0000:00:03.0: enabling device (0000 -> 0002)
[    0.858895] PCI: CLS 0 bytes, default 64
[    0.862598] Trying to unpack rootfs image as initramfs...
[    1.971907] Freeing initrd memory: 26924K
[    1.973266] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 5 counters available
[    1.973690] kvm [1]: IPA Size Limit: 44bits
[    1.975834] kvm [1]: vgic-v2@2c020000
[    1.975983] kvm [1]: GIC system register CPU interface enabled
[    1.976215] kvm [1]: vgic interrupt IRQ1
[    1.977004] kvm [1]: Hyp mode initialized successfully
[    1.980549] Initialise system trusted keyrings
[    1.982154] Key type blacklist registered
[    1.982751] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.992234] zbud: loaded
[    1.994812] integrity: Platform Keyring initialized
[    1.994865] Key type asymmetric registered
[    1.994930] Asymmetric key parser 'x509' registered
[    1.995101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.995660] io scheduler mq-deadline registered
[    1.999716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.000519] efifb: probing for efifb
[    2.000908] efifb: framebuffer at 0x80000000, using 1876k, total 1875k
[    2.000923] efifb: mode is 800x600x32, linelength=3200, pages=1
[    2.000935] efifb: scrolling: redraw
[    2.000982] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.004232] Console: switching to colour frame buffer device 100x37
[    2.010065] fb0: EFI VGA frame buffer device
[    2.015176] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.017821] Serial: AMBA driver
[    2.018023] msm_serial: driver initialized
[    2.021448] mousedev: PS/2 mouse device common for all mice
[    2.024376] rtc-efi rtc-efi.0: registered as rtc0
[    2.024887] rtc-efi rtc-efi.0: setting system clock to 2020-08-28T10:45:19 UTC (1598611519)
[    2.026876] ledtrig-cpu: registered to indicate activity on CPUs
[    2.029424] NET: Registered protocol family 10
[    2.197497] Segment Routing with IPv6
[    2.197899] mip6: Mobile IPv6
[    2.198011] NET: Registered protocol family 17
[    2.198421] mpls_gso: MPLS GSO support
[    2.199287] registered taskstats version 1
[    2.199332] Loading compiled-in X.509 certificates
[    2.292262] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.292586] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    2.293592] zswap: loaded using pool lzo/zbud
[    2.294899] Key type ._fscrypt registered
[    2.294912] Key type .fscrypt registered
[    2.294921] Key type fscrypt-provisioning registered
[    2.295963] AppArmor: AppArmor sha1 policy hashing enabled
[    2.345610] Freeing unused kernel memory: 5184K
[    2.457249] Checked W+X mappings: passed, no W+X pages found
[    2.457370] Run /init as init process
[    2.457452]   with arguments:
[    2.457477]     /init
[    2.457489]   with environment:
[    2.457499]     HOME=/
[    2.457508]     TERM=linux
[    2.457512]     BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-arm64
[    3.901714] pps_core: LinuxPPS API ver. 1 registered
[    3.901733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.974738] PTP clock support registered
[    4.096010] SCSI subsystem initialized
[    4.201489] ACPI: bus type USB registered
[    4.201935] usbcore: registered new interface driver usbfs
[    4.202096] usbcore: registered new interface driver hub
[    4.202337] usbcore: registered new device driver usb
[    4.247352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.251755] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.251766] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.268421] ehci-platform: EHCI generic platform driver
[    4.269025] ehci-platform LNRO0D20:00: Error: DMA mask configuration failed
[    4.283581] PCI Interrupt Link [GSI1] enabled at IRQ 36
[    4.284104] e1000e 0000:00:01.0: enabling device (0000 -> 0002)
[    4.314496] e1000e 0000:00:01.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.314924] e1000e 0000:00:01.0 0000:00:01.0 (uninitialized): Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.
[    4.315300] e1000e 0000:00:01.0 0000:00:01.0 (uninitialized): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
[    4.325062] ehci-platform: probe of LNRO0D20:00 failed with error -5
[    4.355901] libata version 3.00 loaded.
[    4.366807] e1000e 0000:00:01.0 0000:00:01.0 (uninitialized): registered PHC clock
[    4.413412] ahci LNRO001E:00: supply ahci not found, using dummy regulator
[    4.439198] ahci LNRO001E:00: supply phy not found, using dummy regulator
[    4.439678] ahci LNRO001E:00: supply target not found, using dummy regulator
[    4.444924] e1000e 0000:00:01.0 eth0: (PCI Express:2.5GT/s:Width x1) 52:54:00:12:34:56
[    4.444944] e1000e 0000:00:01.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.445079] e1000e 0000:00:01.0 eth0: MAC: 3, PHY: 8, PBA No: 000000-000
[    4.454966] PCI Interrupt Link [GSI3] enabled at IRQ 38
[    4.456041] xhci_hcd 0000:00:03.0: xHCI Host Controller
[    4.456382] xhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[    4.462084] ahci LNRO001E:00: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl platform mode
[    4.462155] ahci LNRO001E:00: flags: 64bit ncq only 
[    4.482041] xhci_hcd 0000:00:03.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    4.508937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    4.508968] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.508981] usb usb1: Product: xHCI Host Controller
[    4.508994] usb usb1: Manufacturer: Linux 5.7.0-0.bpo.2-arm64 xhci-hcd
[    4.509006] usb usb1: SerialNumber: 0000:00:03.0
[    4.514247] scsi host0: ahci
[    4.522303] hub 1-0:1.0: USB hub found
[    4.523282] scsi host1: ahci
[    4.524037] hub 1-0:1.0: 4 ports detected
[    4.531964] e1000e 0000:00:01.0 enp0s1: renamed from eth0
[    4.538925] scsi host2: ahci
[    4.541968] xhci_hcd 0000:00:03.0: xHCI Host Controller
[    4.542001] xhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    4.542066] xhci_hcd 0000:00:03.0: Host supports USB 3.0 SuperSpeed
[    4.544857] scsi host3: ahci
[    4.546136] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.546519] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[    4.546528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.546533] usb usb2: Product: xHCI Host Controller
[    4.546539] usb usb2: Manufacturer: Linux 5.7.0-0.bpo.2-arm64 xhci-hcd
[    4.546544] usb usb2: SerialNumber: 0000:00:03.0
[    4.547847] hub 2-0:1.0: USB hub found
[    4.549353] hub 2-0:1.0: 4 ports detected
[    4.551106] scsi host4: ahci
[    4.560441] scsi host5: ahci
[    4.561270] ata1: SATA max UDMA/133 mmio [mem 0x60100000-0x60100fff] port 0x100 irq 6
[    4.561320] ata2: SATA max UDMA/133 mmio [mem 0x60100000-0x60100fff] port 0x180 irq 6
[    4.561326] ata3: SATA max UDMA/133 mmio [mem 0x60100000-0x60100fff] port 0x200 irq 6
[    4.561332] ata4: SATA max UDMA/133 mmio [mem 0x60100000-0x60100fff] port 0x280 irq 6
[    4.561337] ata5: SATA max UDMA/133 mmio [mem 0x60100000-0x60100fff] port 0x300 irq 6
[    4.561342] ata6: SATA max UDMA/133 mmio [mem 0x60100000-0x60100fff] port 0x380 irq 6
[    4.873438] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.881064] ata2: SATA link down (SStatus 0 SControl 300)
[    4.882577] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.884870] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    4.884896] ata1.00: 25165824 sectors, multi 16: LBA48 NCQ (depth 32)
[    4.884983] ata1.00: applying bridge limits
[    4.885943] ata1.00: configured for UDMA/100
[    4.895028] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
[    4.898301] ata3: SATA link down (SStatus 0 SControl 300)
[    4.898366] ata4: SATA link down (SStatus 0 SControl 300)
[    4.908512] ata5: SATA link down (SStatus 0 SControl 300)
[    4.908600] ata6: SATA link down (SStatus 0 SControl 300)
[    5.003030] sd 0:0:0:0: [sda] 25165824 512-byte logical blocks: (12.9 GB/12.0 GiB)
[    5.003547] sd 0:0:0:0: [sda] Write Protect is off
[    5.003574] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.005420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.020276]  sda: sda1 sda2 sda3
[    5.021870] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    5.021881] usb 1-1: New USB device strings: Mfr=1, Product=4, SerialNumber=11
[    5.021887] usb 1-1: Product: QEMU USB Keyboard
[    5.021892] usb 1-1: Manufacturer: QEMU
[    5.021897] usb 1-1: SerialNumber: 68284-0000:00:03.0-1
[    5.048651] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.075462] hid: raw HID events driver (C) Jiri Kosina
[    5.099459] usbcore: registered new interface driver usbhid
[    5.099486] usbhid: USB HID core driver
[    5.133332] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    5.165333] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.198030] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:03.0-1/input0
[    5.317619] usb 1-2: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    5.317640] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[    5.317646] usb 1-2: Product: QEMU USB Tablet
[    5.317651] usb 1-2: Manufacturer: QEMU
[    5.317657] usb 1-2: SerialNumber: 28754-0000:00:03.0-2
[    5.321005] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    5.328075] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:03.0-2/input0
[    5.533005] PM: Image not found (code -22)
[    5.769166] random: fast init done
[    6.103697] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.543907] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    6.803133] systemd[1]: Inserted module 'autofs4'
[    6.962288] systemd[1]: systemd 245.7-1~bpo10+1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.963314] systemd[1]: Detected architecture arm64.
[    6.978123] systemd[1]: Set hostname to <debian>.
[    8.258546] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    8.350504] random: systemd: uninitialized urandom read (16 bytes read)
[    8.362374] systemd[1]: Created slice system-getty.slice.
[    8.363897] random: systemd: uninitialized urandom read (16 bytes read)
[    8.366045] systemd[1]: Created slice system-modprobe.slice.
[    8.366164] random: systemd: uninitialized urandom read (16 bytes read)
[    8.367817] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.370258] systemd[1]: Created slice User and Session Slice.
[    8.371719] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.372135] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.376159] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.377072] systemd[1]: Reached target Local Encrypted Volumes.
[    8.377529] systemd[1]: Reached target Paths.
[    8.377657] systemd[1]: Reached target Remote File Systems.
[    8.377764] systemd[1]: Reached target Slices.
[    8.380779] systemd[1]: Listening on Syslog Socket.
[    8.382177] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.383142] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.386732] systemd[1]: Listening on Journal Audit Socket.
[    8.387596] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.388464] systemd[1]: Listening on Journal Socket.
[    8.389636] systemd[1]: Listening on udev Control Socket.
[    8.390209] systemd[1]: Listening on udev Kernel Socket.
[    8.402906] systemd[1]: Mounting Huge Pages File System...
[    8.420315] systemd[1]: Mounting POSIX Message Queue File System...
[    8.453774] systemd[1]: Mounting Kernel Debug File System...
[    8.490220] systemd[1]: Mounting Kernel Trace File System...
[    8.540208] systemd[1]: Starting Set the console keyboard layout...
[    8.635429] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.713041] systemd[1]: Starting Load Kernel Module drm...
[    8.726926] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.727333] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.812586] systemd[1]: Starting Journal Service...
[    8.858576] systemd[1]: Starting Load Kernel Modules...
[    8.904926] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.971405] systemd[1]: Starting udev Coldplug all Devices...
[    9.085855] systemd[1]: Mounted Huge Pages File System.
[    9.087542] systemd[1]: Mounted POSIX Message Queue File System.
[    9.088317] systemd[1]: Mounted Kernel Debug File System.
[    9.089070] systemd[1]: Mounted Kernel Trace File System.
[    9.147435] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    9.403060] systemd[1]: Finished Load Kernel Modules.
[    9.405114] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    9.414762] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[    9.470872] systemd[1]: Starting Apply Kernel Variables...
[    9.636163] systemd[1]: modprobe@drm.service: Succeeded.
[    9.653656] systemd[1]: Finished Load Kernel Module drm.
[    9.847081] random: crng init done
[    9.847121] random: 7 urandom warning(s) missed due to ratelimiting
[    9.857557] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.910430] systemd[1]: Finished Remount Root and Kernel File Systems.
[    9.926135] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    9.926538] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    9.974962] systemd[1]: Starting Load/Save Random Seed...
[   10.053971] systemd[1]: Starting Create System Users...
[   10.105664] systemd[1]: Finished Apply Kernel Variables.
[   10.501005] systemd[1]: Finished Load/Save Random Seed.
[   10.661514] systemd[1]: Finished Create System Users.
[   10.824452] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.302019] systemd[1]: Finished Create Static Device Nodes in /dev.
[   11.382654] systemd[1]: Starting udev Kernel Device Manager...
[   11.710816] systemd[1]: Finished udev Coldplug all Devices.
[   11.758297] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[   12.014562] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[   12.179560] systemd[1]: Started udev Kernel Device Manager.
[   12.241601] systemd[1]: Finished Set the console keyboard layout.
[   12.242717] systemd[1]: Reached target Local File Systems (Pre).
[   13.548127] systemd[1]: Found device /dev/ttyAMA0.
[   13.771134] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.828741] EFI Variables Facility v0.08 2004-May-17
[   13.992443] pstore: Using crash dump compression: deflate
[   13.993006] pstore: Registered efi as persistent store backend
[   14.197284] checking generic (80000000 1d5000) vs hw (80000000 1000000)
[   14.197325] fb0: switching to bochsdrmfb from EFI VGA
[   14.214895] Console: switching to colour dummy device 80x25
[   14.238777] [drm] Found bochs VGA, ID 0xb0c5.
[   14.238809] [drm] Framebuffer size 16384 kB @ 0x80000000, mmio @ 0x81094000.
[   14.286145] [TTM] Zone  kernel: Available graphics memory: 2012462 KiB
[   14.286204] [TTM] Initializing pool allocator
[   14.286357] [TTM] Initializing DMA pool allocator
[   14.288349] [drm] Found EDID data blob.
[   14.358503] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[   15.976931] systemd[1]: Started Journal Service.
[   17.322214] Console: switching to colour frame buffer device 128x48
[   17.332104] bochs-drm 0000:00:02.0: fb0: bochs-drmdrmfb frame buffer device
[   17.527980] cryptd: max_cpu_qlen set to 1000
[   17.737649] systemd-journald[190]: Received client request to flush runtime journal.
[   17.788418] systemd-journald[190]: File /var/log/journal/6e19b55ebdee42218ba82bbf1c26be0a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   19.159955] Adding 4012028k swap on /dev/sda3.  Priority:-2 extents:1 across:4012028k FS
[   19.773988] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   21.052198] audit: type=1400 audit(1598611538.524:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=378 comm="apparmor_parser"
[   21.054852] audit: type=1400 audit(1598611538.524:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=378 comm="apparmor_parser"
[   21.054881] audit: type=1400 audit(1598611538.524:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=378 comm="apparmor_parser"
[   21.150287] audit: type=1400 audit(1598611538.624:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=380 comm="apparmor_parser"
[   21.150322] audit: type=1400 audit(1598611538.624:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=380 comm="apparmor_parser"
[   23.086563] e1000e 0000:00:01.0 enp0s1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   23.087959] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s1: link becomes ready
[   44.381607] systemd-journald[190]: File /var/log/journal/6e19b55ebdee42218ba82bbf1c26be0a/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.