Shell> FS0:Bsa.efi BSA Architecture Compliance Suite Version 1.0.3 Starting tests with print level : 3 Creating Platform Information Tables PE_INFO: Number of PE detected : 2 GIC_INFO: Number of GICD : 1 GIC_INFO: Number of ITS : 1 GTDT don't have el2 virt timer info using bsa recommended value 28 TIMER_INFO: Number of system timers : 0 WATCHDOG_INFO: Number of Watchdogs : 1 PCIE_INFO: Number of ECAM regions : 1 PCIE_INFO: Number of BDFs found : A PCIE_INFO: Number of RCiEP : 0 PCIE_INFO: Number of RCEC : 0 PCIE_INFO: Number of EP : 4 PCIE_INFO: Number of RP : 5 PCIE_INFO: Number of iEP_EP : 0 PCIE_INFO: Number of iEP_RP : 0 SMMU_INFO: Number of SMMU CTRL : 0 Peripheral: Num of USB controllers : 1 Peripheral: Num of SATA controllers : 1 Peripheral: Num of UART controllers : 1 *** Starting PE tests *** Operating System View: 1 : Check Arch symmetry across PE : Result: PASS 2 : Check for number of PE : Result: PASS 3 : Check for AdvSIMD and FP support : Result: PASS 4 : Check PE 4KB Granule Support Failed on PE - 0 Checkpoint -- 1 : Result: FAIL 5 : Check HW Coherence support : Result: PASS 6 : Check Cryptographic extensions : Result: PASS 7 : Check Little Endian support : Result: PASS 8 : Check EL1 and EL0 implementation : Result: PASS 9 : Check for PMU and PMU counters : Result: PASS 10 : Check PMU Overflow signal : Result: PASS 11 : Check num of Breakpoints and type : Result: PASS 12 : Check Synchronous Watchpoints : Result: PASS 13 : Check CRC32 instruction support : Result: PASS 14 : Check PAuth if implementation : Result: PASS Hypervisor View: 51 : Check EL2 implementation : Result: PASS 52 : Check Stage 2 4KB Granule Support : Result: PASS 53 : Check Stage2 and Stage1 Granule match : Result: PASS 54 : Check for PMU counters : Result: PASS 55 : Check VMID breakpoint number : Result: PASS Platform Security View: 76 : Check EL3 implementation : Result: PASS *** One or more tests have Failed/Skipped.*** *** Starting Memory Map tests *** Operating System View: 102 : Mem Access Response in finite time : Result: PASS 103 : PE must access all NS addr space : Result: PASS All Memory tests have passed!! *** Starting GIC tests *** Operating System View: 201 : Check GIC version : Result: PASS 202 : Check GICv2 Valid Configuration Checkpoint -- 1 : Result: SKIPPED 203 : If PCIe, GICv3 then ITS, LPI : Result: PASS 204 : Check GICv3 Security States : Result: PASS 205 : Non-secure SGIs are implemented : Result: PASS 206 : Check PPI Assignments for OS : Result: PASS Hypervisor View: 226 : Check PPI Assignments Hypervisor EL2-Virtual timer interrupt 28 not received : Result: PASS No GICv2m, Skipping all GICv2m tests *** Starting ITS tests *** Operating System View: 276 : Check number of ITS blocks in a group : Result: PASS 277 : Check ITS block association with group : Result: PASS 278 : Check uniqueness of StreamID Failed on PE - 0 Checkpoint -- 3 : Result: FAIL 279 : Check Device's ReqID-DeviceID-StreamID Failed on PE - 0 Checkpoint -- 3 : Result: FAIL *** One or more tests have Failed/Skipped.*** *** Starting System MMU tests *** No SMMU Controller Found, Skipping SMMU tests... *** Starting Timer tests *** Operating System View: 401 : Check Counter Frequency : Result: PASS 402 : SYS Timer if PE Timer not ON : Result: PASS 403 : Memory mapped timer check Checkpoint -- 1 : Result: SKIPPED 404 : Generate Mem Mapped SYS Timer Intr Checkpoint -- 1 : Result: SKIPPED 405 : Restore PE timer on PE wake up Checkpoint -- 1 : Result: SKIPPED *** One or more tests have Failed/Skipped.*** *** Starting Power and Wakeup semantic tests *** Operating System View: 503 : Wake from EL0 PHY Timer Int : Result: PASS 504 : Wake from EL0 VIR Timer Int : Result: PASS 505 : Wake from EL2 PHY Timer Int : Result: PASS 501 : Wake from Watchdog WS0 Int : Result: PASS 502 : Wake from System Timer Int Checkpoint -- 1 : Result: SKIPPED *** One or more tests have Failed/Skipped.*** *** Starting Peripheral tests *** Operating System View: 601 : USB CTRL Interface : Result: PASS 602 : Check SATA CTRL Interface Read PCIe_CFG: ECAM Base is zero FF000000 : Result: PASS 603 : Check Arm BSA UART register offsets : Result: PASS 604 : Check Arm GENERIC UART Interrupt Test Message : Result: PASS 606 : 16550 compatible UART Checkpoint -- 2 : Result: SKIPPED *** One or more tests have Failed/Skipped.*** *** Starting Watchdog tests *** Operating System View: 701 : Non Secure Watchdog Access : Result: PASS 702 : Check Watchdog WS0 interrupt : Result: PASS All Watchdog tests passed!! *** Starting PCIe tests *** Operating System View: 801 : Check ECAM Presence : Result: PASS 802 : PE - ECAM Region accessibility check : Result: PASS 803 : All EP/Sw under RP in same ECAM Region : Result: PASS 804 : Check RootPort NP Memory Access : Result: PASS 805 : Check RootPort P Memory Access : Result: PASS 806 : Legacy int must be SPI & lvl-sensitive Checkpoint -- 2 : Result: SKIPPED 808 : Check all 1's for out of range Failed for BDF: 0x60800 Failed on PE - 0 Checkpoint -- 2 : Result: FAIL 809 : Vendor specfic data are PCIe compliant : Result: PASS 811 : Check RP Byte Enable Rules : Result: PASS 817 : Check Direct Transl P2P Support Checkpoint -- 1 : Result: SKIPPED 818 : Check RP Adv Error Report Checkpoint -- 1 : Result: SKIPPED 819 : RP must suprt ACS if P2P Txn are allow Checkpoint -- 1 : Result: SKIPPED 820 : Type 0/1 common config rule : Result: PASS 821 : Type 0 config header rules : Result: PASS 822 : Check Type 1 config header rules BDF 0x100 : SLT attribute mismatch BDF 0x200 : SLT attribute mismatch BDF 0x300 : SLT attribute mismatch BDF 0x400 : SLT attribute mismatch BDF 0x500 : SLT attribute mismatch Failed on PE - 0 Checkpoint -- 5 : Result: FAIL 824 : Device capabilities reg rule : Result: PASS 825 : Device Control register rule : Result: PASS 826 : Device cap 2 register rules : Result: PASS 830 : Check Cmd Reg memory space enable : Result: PASS 831 : Check Type0/1 BIST Register rule : Result: PASS 832 : Check HDR CapPtr Register rule : Result: PASS 833 : Check Max payload size supported : Result: PASS 835 : Check Function level reset : Result: PASS 836 : Check ARI forwarding enable rule : Result: PASS 837 : Check Config Txn for RP in HB : Result: PASS 838 : Check all RP in HB is in same ECAM : Result: PASS 839 : Check MSI support for PCIe dev : Result: PASS *** One or more tests have Failed/Skipped.*** *** Starting PCIe Exerciser tests *** No Exerciser Devices Found, Skipping tests... ------------------------------------------------------- Total Tests run = 77 Tests Passed = 62 Tests Failed = 5 ------------------------------------------------------- *** BSA tests complete. Reset the system. ***